|
10-01-2013, 08:51 PM
|
#1 |
|
Registered User
Join Date: Aug 2010
Location: Baltimore, Maryland
Posts: 68
|
Replacing doors
I have a set of doors I found for my truck at the salvage yard and I am ready to install them. Does anyone have any recommendations on the best way to take old ones off and install the "new" ones? I have to replace the hinges on drivers side as well. I bought all new weather stripping as well. I will post pictures of my truck when I start this. I just want to gather thoughts from others who have done this already. I am by no means a experienced mechanic, just a driveway mechanic! Lol. I just finished replacing front brake lines, hoses, calipers, and pads. I bought my truck almost 8 yrs ago and I am slooowly rebuilding/restoring as I drive her. She's not my daily driver but I love this truck!
Thanks for any help or links anyone may have |
|
|
|
10-01-2013, 09:55 PM
|
#2 |
|
Another Day, Another Dollar
Join Date: Nov 2008
Location: North Vancouver, BC
Posts: 1,316
|
Re: Replacing doors
First off enlist a helper
Second mark the position of everything. Third. To get your top hinge off you have to go from under the dash an pull the rubber plug where your door switch wires come through Fourth. Be patient!! Posted via Mobile Device
__________________
-78 K20 Cheyenne 454 long box, 4" lift, 35" MT's, '84 cab, '80 box "its hip to be square" 
|
|
|
|
|
10-01-2013, 09:56 PM
|
#3 |
|
Another Day, Another Dollar
Join Date: Nov 2008
Location: North Vancouver, BC
Posts: 1,316
|
Re: Replacing doors
Very patient!
Posted via Mobile Device
__________________
-78 K20 Cheyenne 454 long box, 4" lift, 35" MT's, '84 cab, '80 box "its hip to be square"
|
|
|
|
|
10-02-2013, 12:06 AM
|
#4 |
|
Registered User
Join Date: Jul 2011
Location: back 40, bc
Posts: 3,906
|
Re: Replacing doors
cant just do a hinge pin change instead of the hinges? that & a new striker will usually get a door shutting nice
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
