The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-02-2013, 12:40 AM   #1
60ShortStepGMC
Registered User
 
60ShortStepGMC's Avatar
 
Join Date: Jun 2013
Location: Sacto, CA
Posts: 43
Seeking Wire Wisdom

Background
The after market turn signal assembly (sig-flare 900) kinda worked, just not exactly right. I yanked it. And, in hopeful new-guy style, I refurbished my steering column turn signal assembly and switch. When I plugged the harness to the stock switch... nothing (not really a surprise I suppose). No turn signals front or rear.

Now, after making these changes, when headlight switch is pulled full out I have no rear lights and when headlight switch is pulled half out my turn signal controller ticks while heater fan whirrs in unison.

Assessment
Looking at everything under the dash, it seems a newer-ish wiring harness section was added. Everything else fore and aft of this area is old. Also, there's only two wires from fusebox to dash: cigarette lighter, which I added, and heater fan.

It seems to me that I have two options: 1) reinstall the sig-flare assembly and limp by while saving money, or 2) work through the harness one wire at a time, spending money here and there as I cut/splice as needed to match the specs.

I'm leaning strongly towards option 2. Sure, I may use all the same colored wire but I'd label it all, solder it all and learn much about the schematic. Anything I do would surely be an improvement. But, I'm susceptible to new-guy hopefulness. Which leads me to my question(s)....

Sanity Check
For those of you older, wiser and more experienced than I, do you have any insights? What are the obvious pitfalls I may encounter along the way (either option)? What other things should I consider?
60ShortStepGMC is offline   Reply With Quote
Old 10-02-2013, 01:57 AM   #2
Vernski
Registered User
 
Join Date: May 2009
Location: Rathdrum, Idaho
Posts: 1,135
Re: Seeking Wire Wisdom

Hi 60 short step this link will help you even if it is for GMC..Vernski

http://6066gmcclub.com/gmcguy/wire-tips.html
Vernski is offline   Reply With Quote
Old 10-02-2013, 08:13 PM   #3
60ShortStepGMC
Registered User
 
60ShortStepGMC's Avatar
 
Join Date: Jun 2013
Location: Sacto, CA
Posts: 43
Re: Seeking Wire Wisdom

Quote:
Originally Posted by Vernski View Post
Thanks Vernski, I had a different link for that info and it went belly-up. Nice to have it back!
60ShortStepGMC is offline   Reply With Quote
Old 10-02-2013, 10:09 PM   #4
Vernski
Registered User
 
Join Date: May 2009
Location: Rathdrum, Idaho
Posts: 1,135
Re: Seeking Wire Wisdom

Quote:
Originally Posted by 60ShortStepGMC View Post
Thanks Vernski, I had a different link for that info and it went belly-up. Nice to have it back!
You are quite welcome there is a link to the hostile takeover by Jollys kinfolk on his wife's side if you understand what that meant. I'll see if I can find it and post it if you haven't seen the link it's quite a story about what happened to Jolly and all his property. And I thank God I don't have family like that, I'd have to shoot them all..Vernski
Vernski is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com