no power in cab.

[86c20]

ok so my 85 k30 6.2 was turning over fine.(new ip was bleeding it out) then i hit the key and lost every thing. i have power to the fuse box but nothing anywhere else. i split the box and see no wires pulled and i even checked the power coming in and i have 12.68 just like i should but still nothing in the cab works. headlights are the only thing. she wont crank over no glow plugs wtf?? help!!

[Rubble]

Do you have power at the junction block on firewall beside the brake booster? There is a fusable link from starter to that block that powers the cab if I remember correctly??
Posted via Mobile Device

[86c20]

yep was the first thing i checked. i have power every where but the cab. that red wire is the main feed right?

[Rubble]

I believe so...I am trying to think what else to check & drawing a blank now.Pretty sure that is the only power feed into the cab,but someone else should be able to clarify it.
Posted via Mobile Device

[86c20]

update.
tryed the truck again. cranked for a bit then stoped so thinking maybe something is getting hot. but still cant get her to fire off.

[clapage6]

I'm thinking by the sounds of it perhaps your ignition switch took a crap..... I think the best way is to check for keyed power at the fuse box with key on.... perhaps that's the issue

[86c20]

clapage that is what i am thinking too. any other way to tell?? and how do i geet the thing out?