Motor mount help

[61sub]

I am getting ready to remove the 305 V6 out of my 61 suburban and put in a 327 out of a 62 car. Does anyone know if I will have to move motor mounts and if so are there bolt in ones available or do I need to fab some up? Thanks for any advice in advance!

Thanks
Adam

[Jurassic-1]

The stands may work measure the bell housing to the mount. If it is in a different position or even different mounts you can find used V8 stands around and they directly bolt in. It should be an easy install.

[JMR5]

Here is a nice write up and pictures showing exactly what you need to do. I have this one saved because the prior owner on my 60 GMC did a crappy job trying to fab some V8 mounts and I'm going to cut them out and do it this way eventually.

http://67-72chevytrucks.com/vboard/s...d.php?t=369663

[61sub]

Originally Posted by JMR5

Here is a nice write up and pictures showing exactly what you need to do. I have this one saved because the prior owner on my 60 GMC did a crappy job trying to fab some V8 mounts and I'm going to cut them out and do it this way eventually.

http://67-72chevytrucks.com/vboard/s...d.php?t=369663

Thank you for the info!!! Looks to be very helpful

Thanks
Adam