The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-16-2014, 02:15 AM   #1
k7cdl
Registered User
 
Join Date: Dec 2013
Location: Sheridan WY
Posts: 29
tire and wheel change over questions

right now i have 235/75/15 right now. i would like to change over to 245/75/16. would i have any problems with this change over? i'm taking off the running boards to give me a little more room.

k7cdl is offline   Reply With Quote
Old 02-16-2014, 08:37 AM   #2
nekkidhillbilly
Account Suspended
 
Join Date: Apr 2009
Location: hazard, ky
Posts: 1,674
Re: tire and wheel change over questions

i wouldnt think so. prob knock the speedo off but im sure your aware of that.
nekkidhillbilly is offline   Reply With Quote
Old 02-16-2014, 10:59 AM   #3
cadillac_al
Registered User
 
Join Date: Oct 2013
Location: Maine
Posts: 2,376
Re: tire and wheel change over questions

You must have some free tires. You are going to lose your hubcaps. If you are buying tires there is always a30x9.50 or 31 or 32 x 10.50's to put more meat on the rims. If you have some cheap 16's with rims they should fit easy enough.
__________________
76 Chevy K20
76 GMC K15
77 Chevy C10
77 Chevy K10
cadillac_al is offline   Reply With Quote
Old 02-16-2014, 04:40 PM   #4
k7cdl
Registered User
 
Join Date: Dec 2013
Location: Sheridan WY
Posts: 29
Re: tire and wheel change over questions

yes that's the main thing i will hate is losing the hub caps but i like the load rating of 245/75/16
k7cdl is offline   Reply With Quote
Old 02-17-2014, 08:52 AM   #5
cadillac_al
Registered User
 
Join Date: Oct 2013
Location: Maine
Posts: 2,376
Re: tire and wheel change over questions

Oh, so you do some heavy towing? I have always wanted to have some 16" 5 lug steelies made for my half tons so I could run 235/85r16 tires and still keep my hubcaps. I have never found any already made though. I have seen 235/75r15 tires abused beyond belief when I worked in a grain warehouse. We used to load a ton of grain on 1/2 ton trucks and never heard of a blown tire but it is definitely not safe and the distances were short.

If you haul or tow heavy loads then you probably do need some 16's. I think you will have to go with an aftermarket wheel. I did buy some 5 lug 16" D spoke NASCAR style wheels for my truck but ended up selling them in the boxes before I got to try them. Those are usually less than $100/wheel. Actually Summit sells aluminum wheels for about $100/wheel.
__________________
76 Chevy K20
76 GMC K15
77 Chevy C10
77 Chevy K10
cadillac_al is offline   Reply With Quote
Old 02-17-2014, 11:39 AM   #6
GRADYS Performance
Registered User
 
GRADYS Performance's Avatar
 
Join Date: Dec 2013
Location: Columbus, Oh
Posts: 367
Re: tire and wheel change over questions

The 245/75-16 tire will fit with no problem.
GRADYS Performance is offline   Reply With Quote
Old 02-17-2014, 03:41 PM   #7
k7cdl
Registered User
 
Join Date: Dec 2013
Location: Sheridan WY
Posts: 29
Re: tire and wheel change over questions

its not so much i plan on doing heavy hauling but better to go over kill on load rating then go under rating. i'm sure that 454 puts a lot of weight on tires alone. plus in 2015 i'm going to look at doing a 5k mile trip and it would be nice to have a good set of 10 ply tires when hauling an ATV and a travel trailer for that long mile. I guess I just drove truck for 2 1/2 years no longer drive semi but learned in that 2 1/2 years better to go over kill on tires and not need the over kill then to need the better tires and be stuck in the middle of no where
k7cdl is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:08 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com