08 Sierra Fender Replacement Q's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dale99 · 02-23-2014, 06:27 PM

On my 08 sierra, I went to start sanding the fender down to fix flaking paint, and found a whole lot of bondo in it. So I am wanting to possible replace it.

1. How hard is it to replace? I see headlight out, hood loose on the that side, plastic liner to be removed. Is the inner fender part of the fender, or can it stay?
2. I see 1500's are a different part number from the 2500. Whats the difference? Bigger flares, raised for the taller hood?

Dale99 · 02-23-2014, 11:44 PM

ok, did more searching and figured out 1500-2500-3500 are all the same.

But I'm still wondering on #1. What all has to come off/apart?

02-23-2014, 11:44 PM	#2
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: 08 Sierra Fender Replacement Q's ok, did more searching and figured out 1500-2500-3500 are all the same. But I'm still wondering on #1. What all has to come off/apart?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-23-2014, 06:27 PM	#1
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	08 Sierra Fender Replacement Q's On my 08 sierra, I went to start sanding the fender down to fix flaking paint, and found a whole lot of bondo in it. So I am wanting to possible replace it. 1. How hard is it to replace? I see headlight out, hood loose on the that side, plastic liner to be removed. Is the inner fender part of the fender, or can it stay? 2. I see 1500's are a different part number from the 2500. Whats the difference? Bigger flares, raised for the taller hood? __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.