Hiding Wiring Question

[60paco]

So Ive Been Trying To Figure Out How To Hide All The Wires For A Clean Look And I Was Wondering What You Guys All Did To Hide The Wires For The Motor And All The Under Hood Stuff

[dantimdad]

Mine isn't done yet. But, the plan is to box in the underside of the inner fender channel at the top and have all the headlight/battery/horn wires hidden that way.

The hood wires are going to be tucked and secured in the lip of the hood and go from the hood to the cab in a loom.

The wires in the cab are going to be hidden by a full under dash panel and mounting the fuse box behind the panel so it doesn't show either.

I'll have pics when I get to that point in my build thread but, it's at least 3 months out.

Steven

[60paco]

I Ran All My Headlight Wires Through The Frame On My 60, I just Wasn't Sure How To Run The Motor Stuff( Starter, Alternator, Coil, Etc) My Firewall Is Shaved So Im Kinda Stuck Now

[Chevy Fleetside]

Since I put a differnt gas pedal in. I used the hole to run my engine wires in. I also ran the headlight wires through the inner fender as mentioned above. The spark plug wires are extra long and run behind the engine and under the exaust. I haven't done much with the hood wires yet but will probably get to it sooner or later.. I should get an updated picture but I wanted to clean up the brake lines first.