MI WTB: Turbo 400 Flywheel Inspection Cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Mr Banshee** · 10-07-2014, 03:30 PM

I am looking for a cast aluminum inspection cover (Flexplate Cover) for a turbo 400 transmission that is bolted to the transmission case with 6 bolts and the reinforcement rods that bolt to the cover and engine mounts. Thanks Mike

**396ci** · 10-29-2014, 10:35 AM

is this what your looking for?

**Mr Banshee** · 10-29-2014, 01:04 PM

Yes, not sure of what the part numbers are for these covers since my transmission never had one, do you know what year it came off of and is it from a Turbo 400? Also what are you asking for it? Thanks Mike

**396ci** · 10-29-2014, 02:05 PM

hi mike,
this was in with a 67-98 truck parts lot that i purchased a while back. not sure what it fits, it seemed to match your description. i would sell it for $65 shipped if its something you can use. otherwise good luck with your search!
thanks,
brian

**Mr Banshee** · 10-29-2014, 07:27 PM

Hello Brian, I googled that part number on the casting and what I can see it appears to be off of a 4l60E transmission. That could wrong but I don't have any way to confirm what the correct number is or a part to compare with yours so at this time I am going to pass on the offer and still continue to look. Thanks, Mike

**396ci** · 10-29-2014, 07:44 PM

no worries mike, thanks for the info! now i know what i've got.

10-07-2014, 03:30 PM	#1
Mr Banshee Senior Member Join Date: Jan 2013 Location: Warren, Michigan Posts: 223	WTB: Turbo 400 Flywheel Inspection Cover I am looking for a cast aluminum inspection cover (Flexplate Cover) for a turbo 400 transmission that is bolted to the transmission case with 6 bolts and the reinforcement rods that bolt to the cover and engine mounts. Thanks Mike

10-29-2014, 10:35 AM	#2
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 806	Re: WTB: Turbo 400 Flywheel Inspection Cover is this what your looking for? Attached Images __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty

10-29-2014, 01:04 PM	#3
Mr Banshee Senior Member Join Date: Jan 2013 Location: Warren, Michigan Posts: 223	Re: WTB: Turbo 400 Flywheel Inspection Cover Yes, not sure of what the part numbers are for these covers since my transmission never had one, do you know what year it came off of and is it from a Turbo 400? Also what are you asking for it? Thanks Mike

10-29-2014, 02:05 PM	#4
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 806	Re: WTB: Turbo 400 Flywheel Inspection Cover hi mike, this was in with a 67-98 truck parts lot that i purchased a while back. not sure what it fits, it seemed to match your description. i would sell it for $65 shipped if its something you can use. otherwise good luck with your search! thanks, brian __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty

10-29-2014, 07:27 PM	#5
Mr Banshee Senior Member Join Date: Jan 2013 Location: Warren, Michigan Posts: 223	Re: WTB: Turbo 400 Flywheel Inspection Cover Hello Brian, I googled that part number on the casting and what I can see it appears to be off of a 4l60E transmission. That could wrong but I don't have any way to confirm what the correct number is or a part to compare with yours so at this time I am going to pass on the offer and still continue to look. Thanks, Mike

10-29-2014, 07:44 PM	#6
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 806	Re: WTB: Turbo 400 Flywheel Inspection Cover no worries mike, thanks for the info! now i know what i've got. __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.