Vent window bracket help

[Sideways Tim]

I'm refurbing my vent windows on the '66 and as you can see I'm a bracket missing to anchor the driveside (to me - passenger side to you) window at the bottom of the runner. Can anyone take a picture of the missing bracket for me, so I can fab one up?

I know I could just take the other one out from the other side and mirror it, but I did such a nice job putting it back in, I really don't want to disturb it all again.

Cheers!

[Woogeroo]

Your 60-66 FAQ Index...

Glass

Wing or vent window rebuild

check out the others there as well for various photos...

----

-W

[Sideways Tim]

Thanks - I looked through as many pictures as I could, but didn't find any with the bracket I need in clear shot

[Woogeroo]

I'm assuming you mean the bracket the bolts go into toward the bottom, holds it into the door panel ?

-W

[61K10]

this is a pic of my 61 and you can see the bracket at the bottom that bolts to the door. should be close to the 64-66.

[Sideways Tim]

That's the one. Thanks also to Woogero for a stack of pictures, I think I know what I'm aiming for now. Cheers

[Woogeroo]

I'm sure someone on here has a better photo - I coulda swore I had a few better ones of mine.

You could also peruse the parts vendors, they may have accidental shot of that part of the vent window assembly.

-W

[ACK]

If you need better shots, let me know, I should have a vent window in the garage. If I do, I can put a tape measure next to it to help with scale ... you'll have to convert to metric since us Yanks don't quite understand why anyone would use the metric system

[Sideways Tim]

Originally Posted by ACK

If you need better shots, let me know, I should have a vent window in the garage. If I do, I can put a tape measure next to it to help with scale ... you'll have to convert to metric since us Yanks don't quite understand why anyone would use the metric system

That would be perfect - when you get a chance. Real measurements are ok - I don't like the metric system either, the french can stick that right up their tower.

No rush, I go in for hernia surgery tomorrow, so I'm not expecting to be finishing the job until Monday

[nhr3]

These are from the vent window, driverside on my 65 C10. Let me know if you need more detail

[nhr3]

A few more

[Sideways Tim]

Those are great - thanks.

[61K10]

nhr3--thats about as much detail as you can get lol.

[nhr3]

It just happened to be out and sitting right there when I read the thread. I figure if I can help out someone will help me when I need it.

[Sideways Tim]

Job done - many thanks to you all. I even got some of that gearbox stripped down that you can see in my original post.

It'll be a while before I get to refit the window, but at least now it will fit in correctly.

Cheers!