Captian fab does p/s gear box go inside or out

[65burb65]

Does the gearbox bracket I bought from you go on the inside of the frame around or on the outside of the frame rail

[65burb65]

Rail not around

[padresag]

goes on the outside between the str box and the frame so that you can mate the box to the frame
http://www.67-72chevytrucks.com/vboa...d.php?t=332923

ron

[chevy_mike]

Outside like this,

[jonzcustomshop]

also as a hint, use it for a guide to drill out that lower left hole, since the factory hole is kinda close it is a real pita to get the hole right, on my second bracket I used it as a guide and it came out a perfect circle!
you can see the og hole in the picture on the previous post.

[donthekawguy]

I used the template and cut an X into the spots marked as original holes, then center punched where the new holes go and drilled them out. The bottom left was still a little close to the bottom part of the frame so I used a allen head bolt.