|
08-20-2003, 09:28 PM
|
#1 |
|
Registered User
Join Date: Jul 2003
Location: Corning, NY
Posts: 158
|
4wd question
Well I've actually driven my truck for the past four days- a record so far. I think I am starting to get the kinks out of it. I have noticed a new problem that I really haven't checked into yet, but i thought I would see in anyone else in the group has seen something similar. The truck seems to pop out of 4wd after I engage it. The manual says that this may indicate that the transfer case is worn. The truck does have automatic locking hubs. I've heard these can also be a problem. Anyone have any thoughts? Thanks.
Mike H |
|
|
|
08-20-2003, 10:56 PM
|
#2 |
|
5 day ban, learn to behave.
Join Date: Nov 2002
Location: san diego, ca
Posts: 683
|
got a little more info on the truck? year, 10/20/30 engine trans transfer case axles etc
mike |
|
|
|
|
08-20-2003, 11:32 PM
|
#3 |
|
Registered User
Join Date: Jul 2003
Location: Corning, NY
Posts: 158
|
The truck is an 86 k10 1/2 ton. It has a 350 in it with a 700 R Transmission. I am not sure about the transfer case and axles. What's the best way to find that out?
Last edited by mhorning; 08-20-2003 at 11:39 PM. |
|
|
|
|
08-21-2003, 06:55 AM
|
#4 |
|
Registered User
Join Date: Nov 2002
Location: Spring TX
Posts: 113
|
Look on the transfer case you'll find a round metal sign that will probably say NP208. Also on the lid of the glove box you will find a sticker that has the axle ratios.
__________________
350 Crate 10 bolt 3.73 2.5 lift 32x11.50 1904 Edelbrock http://www.oplnk.net/~spirit/K5front.jpg |
|
|
|
|
08-22-2003, 08:51 AM
|
#5 |
|
Registered User
Join Date: Jul 2003
Location: Corning, NY
Posts: 158
|
MIke the transfer case says 208C2 and the rear axle is 3.08.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
