|
08-28-2003, 03:19 PM
|
#1 |
|
Registered User
Join Date: Oct 2002
Location: Chanhassen, MN
Posts: 1,061
|
Headliners
My truck came from the factory without a headliner. I don't have the side pillar pieces or any molding overhead in my cab. I'm wanting to install a headliner as part of my interior project. What would be my best option to get all the pieces I need?
Buy new or go pick what I need out of a junkyard?
__________________
ChevyChic 86 Chevy K-10 If I can't be a good example, then I'll just have to be a horrible warning. "You're braver than you believe, and stronger than you seem, and smarter than you think" - Christopher Robin |
|
|
|
08-28-2003, 04:22 PM
|
#2 |
|
Senior Member
Join Date: Apr 2002
Location: Beaverton, OR
Posts: 1,615
|
Option 1. ( The most expensive route) Trim parts and headliner available through ChevyDuty or LMC. Note: Shipping a headliner intact may be expensive.
Option 2. Check Ebay Auctions, seen the trims pieces there regularly and headliner once in a while. Option 3. (Best Bet) Look for pieces in local junk emporiums. Trim pieces can be refurbished and repainted with vinyl paint. Headliner board can be redone with fabric or vinyl. Check parts forum or list a want. Also check with Tommy, he might find some in Arkansas, but again headliner will cost for shipping because of size. Good Luck & Good Hunting! 
__________________
Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400 |
|
|
|
|
08-28-2003, 04:29 PM
|
#3 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
i got the ones i am using in rusty out of a junker im paingint them ( wet sand out scratches) and with new screws in em theyll look gorgeous did it on my friends blazer like that
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
08-28-2003, 05:32 PM
|
#4 |
|
The full convertible guy
 
Join Date: Jul 2001
Location: Paris Texas
Posts: 728
|
Heather I may have those pieces. At least some of them. I will check this weekend and get back to ya.
Brad
__________________
2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new) |
|
|
|
|
08-28-2003, 06:11 PM
|
#5 |
|
Registered User
Join Date: Oct 2002
Location: Chanhassen, MN
Posts: 1,061
|
Thanks Brad!! Let me know
 In the meantime, I'll start with Ebay and the junkyards.
__________________
ChevyChic 86 Chevy K-10 If I can't be a good example, then I'll just have to be a horrible warning. "You're braver than you believe, and stronger than you seem, and smarter than you think" - Christopher Robin |
|
|
|
|
08-28-2003, 10:11 PM
|
#6 |
|
Overworked and Underlaid
Join Date: May 2002
Location: Flagstaff,Arizona
Posts: 1,279
|
i have complete headliner trim minus the headliner ill sell to you-in good shape not cracked or faded....just paint to your color liking there tan right now.let me know what ya decide.
__________________
I'd rather push a Chevy than drive a Ford The Beast-1978 C10 LWB Red-1978 C10 LWB (Uncle Mike)Michael Henry Millett 11/5/1957 to 03/08/2012 Gone but will never be forgotten-RIP (Uncle Chuck)Charles Manning Gulbronsen Sr 1956-2012 Taken from us to soon but you will live on in our hearts-RIP |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
