Hello from the newbie! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Paul72 · 09-14-2003, 06:25 PM

Hello all,

I came across this site a couple of days ago and have read a lot of the messages - a lot of good info. The pictures of all the rides was what really got me fired up!

I have a '72 Blazer that I got off the family farm back in '95 with 80,000 miles on it (now 105k). It's pretty much your run-of-the-mill Blazer: 350, auto, 4X4, 205, sgl wall top. I have many plans for it and have taken care of all the power train except the motor. The body is another story - 30 years in MN takes care of the rocker boxes and rocker panels. It's very solid from the moulding on up!

I look forward to sharing ideas and stroies - mainly getting inspiration to get out there and work on it!

Later,

Paul

P.S. I can't seem to post my pic. I'll have to try again!

1970blazin · 09-14-2003, 06:45 PM

Hey Welcome Paul72!!!!- Most guys can't post pics until they have either thrown the computer across the room, or asked at least 50 people how to post a pic

Nice blazer!! Also you are in luck we just found out that we can get aftermarket rocker boxes and rockerbox end caps from WES or GMC Paul here on the board. I redid my rockers panels and it wasn't too bad...but I am a welder by trade

Good luck getting your 72 where you want it and have lots of fun!!! We love to see progress pics!!
Ken

FRENCHBLUE72 · 09-14-2003, 06:47 PM

Nice looking blazer!!! Nice tow hook's!!!! Welcome to the board from Southern oregon.

NuBomb · 09-14-2003, 07:14 PM

Welcom from Atlanta GA

Your Blazer sounds like mine. Looks good and sounds like you've got a great start on it. I sure is nice that rocker boxes are now available. Looking forward to hearing your progress and plans.

bouncytruck · 09-15-2003, 11:49 AM

Welcome to the board. If Gee-Emm can fix the rust on his Jimmy, anything is possible!

Davy · 09-15-2003, 01:16 PM

Hey another Blazer owner in MN. Welcome from Rice, MN. We'll have to meet up and help each other with our restorations.

Davy

Paul72 · 09-15-2003, 04:56 PM

Davy -

Definately! I would like to check out your Blazer and get an idea what my rocker boxes USED to look like!

Davy · 09-15-2003, 05:02 PM

My rocker boxes are perfect (Montana truck), but the rocker panels will need replaced. You're welcome to take a look anytime. PM me your phone number.

Davy

HatGuy · 09-15-2003, 06:16 PM

Welcome from Fort Worth Texas.
Ive only been on the borad less
than 2 months and they took me
in like a brother. Good folks here
and I've learned more about my
72' in the last 2 months than I
have in the 16 years I've owned it.

*Gee_Emm* · 09-15-2003, 07:16 PM

Quote:

Originally posted by bouncytruck
Welcome to the board. If Gee-Emm can fix the rust on his Jimmy, anything is possible!

Hey, is that a shot at me :p

Actually I am basically replacing every piece of metal on the Jimmy with parts from other trucks. I am making a Jimmy cab using a pickup cab with the roof chopped off and shortening a LWB bed floor.
The only original sheet metal that will be remaining is the glove box door and the cowl cover.

It is possible

bpmcgee · 09-16-2003, 01:47 AM

Paul,

I like that painted bumper! It's pretty unusual for a blazer!

Have fun,

Brian

Paul72 · 09-16-2003, 10:21 AM

Brian -

That's the stock bumper (repainted). The '72 P/U came with white bumpers as well.

bouncytruck · 09-16-2003, 11:30 AM

Quote:

quote:
------------------------------------------------------------------------
Originally posted by bouncytruck
Welcome to the board. If Gee-Emm can fix the rust on his Jimmy, anything is possible!
------------------------------------------------------------------------

Hey, is that a shot at me

Actually, it's more like a complement! I can't believe what you have done so far with your truck or that you were brave enough to take on that project. Mine's been sitting on the side of the house for over a year with barely any progress. I don't know where you find the time & energy to take on what you have. :p

RICHARD MORGAN · 01-24-2004, 01:45 PM

WELCOME FROM NORFOLK VA !!!

Blue Beard · 01-25-2004, 12:32 AM

Welcome aboard from Washington

09-14-2003, 06:25 PM	#1
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Hello from the newbie! Hello all, I came across this site a couple of days ago and have read a lot of the messages - a lot of good info. The pictures of all the rides was what really got me fired up! I have a '72 Blazer that I got off the family farm back in '95 with 80,000 miles on it (now 105k). It's pretty much your run-of-the-mill Blazer: 350, auto, 4X4, 205, sgl wall top. I have many plans for it and have taken care of all the power train except the motor. The body is another story - 30 years in MN takes care of the rocker boxes and rocker panels. It's very solid from the moulding on up! I look forward to sharing ideas and stroies - mainly getting inspiration to get out there and work on it! Later, Paul P.S. I can't seem to post my pic. I'll have to try again! Attached Images __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

09-14-2003, 06:45 PM	#2
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	Hey Welcome Paul72!!!!- Most guys can't post pics until they have either thrown the computer across the room, or asked at least 50 people how to post a pic Nice blazer!! Also you are in luck we just found out that we can get aftermarket rocker boxes and rockerbox end caps from WES or GMC Paul here on the board. I redid my rockers panels and it wasn't too bad...but I am a welder by trade Good luck getting your 72 where you want it and have lots of fun!!! We love to see progress pics!! Ken __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

09-14-2003, 06:47 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Nice looking blazer!!! Nice tow hook's!!!! Welcome to the board from Southern oregon. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-14-2003, 07:14 PM	#4
NuBomb Registered User Join Date: Jan 2002 Location: Canton, Georgia, USA Posts: 1,119	Welcom from Atlanta GA Your Blazer sounds like mine. Looks good and sounds like you've got a great start on it. I sure is nice that rocker boxes are now available. Looking forward to hearing your progress and plans. __________________ Jeremy (NUBOMB) 72K5 CST 350/350/205 1951 Chevy 1/2 ton North Georgia Group "... And the first rule to being a man is you gotta spend your life doing crap you don't wanna do." Red Forman.

09-15-2003, 11:49 AM	#5
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Welcome to the board. If Gee-Emm can fix the rust on his Jimmy, anything is possible! __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

09-15-2003, 01:16 PM	#6
Davy Registered User Join Date: Apr 2003 Location: Rice, Minnesota Posts: 370	Hey another Blazer owner in MN. Welcome from Rice, MN. We'll have to meet up and help each other with our restorations. Davy __________________ 1970 Blazer CST Looking for NOS items for my CST restoration.

09-15-2003, 04:56 PM	#7
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Davy - Definately! I would like to check out your Blazer and get an idea what my rocker boxes USED to look like! __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

09-15-2003, 05:02 PM	#8
Davy Registered User Join Date: Apr 2003 Location: Rice, Minnesota Posts: 370	My rocker boxes are perfect (Montana truck), but the rocker panels will need replaced. You're welcome to take a look anytime. PM me your phone number. Davy __________________ 1970 Blazer CST Looking for NOS items for my CST restoration.

09-15-2003, 06:16 PM	#9
HatGuy Registered User Join Date: Aug 2003 Location: Fort Worth Texas Posts: 275	Welcome from Fort Worth Texas. Ive only been on the borad less than 2 months and they took me in like a brother. Good folks here and I've learned more about my 72' in the last 2 months than I have in the 16 years I've owned it. Attached Images __________________ Joe Peters the HatGuy 72' K5 Highlander My Daily Driver http://www.pbhats.com/BLAZER/index.html

09-16-2003, 01:47 AM	#11
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	Paul, I like that painted bumper! It's pretty unusual for a blazer! Have fun, Brian

09-16-2003, 10:21 AM	#12
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Brian - That's the stock bumper (repainted). The '72 P/U came with white bumpers as well. __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

01-24-2004, 01:45 PM	#14
RICHARD MORGAN Registered User Join Date: Jan 2004 Location: HERNDON VA Posts: 216	WELCOME FROM NORFOLK VA !!!

01-25-2004, 12:32 AM	#15
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Welcome aboard from Washington __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.