Bolts for 250 fan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1-PU70 · 10-31-2015, 05:32 PM

I have a 250 with with the four blade fan and the 3" spacer. The truck was in a accident and the the front of the water pump was sheared off with the fan, spacer and pulley. Somehow they all got lost. Well I got a fan and spacer put I need the four bolts that hold them on. Does anyone have a spare set they could part with? Thanks Gary

**LockDoc** · 10-31-2015, 08:14 PM

Quote:

Originally Posted by 1-PU70

I have a 250 with with the four blade fan and the 3" spacer. The truck was in a accident and the the front of the water pump was sheared off with the fan, spacer and pulley. Somehow they all got lost. Well I got a fan and spacer put I need the four bolts that hold them on. Does anyone have a spare set they could part with? Thanks Gary

I will try and remember to check in the morning.

LockDoc

cdowns · 11-01-2015, 08:40 AM

you can buy bolts at local autoparts store or ace hardware nuttin special about them common bolts

**LockDoc** · 11-01-2015, 11:38 AM

-
I don't have any extras. Like Cliff said, a good hardware store will have them. 5/16-24 x 3 1/2" long. Just make sure they are grade 5.

LockDoc

1-PU70 · 11-01-2015, 09:35 PM

Will check and see what I can find. Thanks Gary

10-31-2015, 05:32 PM	#1
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	Bolts for 250 fan I have a 250 with with the four blade fan and the 3" spacer. The truck was in a accident and the the front of the water pump was sheared off with the fan, spacer and pulley. Somehow they all got lost. Well I got a fan and spacer put I need the four bolts that hold them on. Does anyone have a spare set they could part with? Thanks Gary __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters

11-01-2015, 08:40 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Bolts for 250 fan you can buy bolts at local autoparts store or ace hardware nuttin special about them common bolts __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

11-01-2015, 11:38 AM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,850	Re: Bolts for 250 fan - I don't have any extras. Like Cliff said, a good hardware store will have them. 5/16-24 x 3 1/2" long. Just make sure they are grade 5. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-01-2015, 09:35 PM	#5
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	Re: Bolts for 250 fan Will check and see what I can find. Thanks Gary __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.