Carb and carb adaptor question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bosco200 · 11-08-2015, 02:30 PM

Hey guys, so I have 72 C20 with a inline 250 and a single barrel mono jet carb, the carb is shot, I've rebuilt it multiple times and it's just doesn't have much life left to it, so I was wanting to put a 2 barrel on, and was wondering what adaptor I would need and what carb would work best, the engine is completely stock. If you could give me a link for where I could get them that would be great thanks.
Posted via Mobile Device

bosco200 · 11-09-2015, 10:05 AM

Anyone?

geezer#99 · 11-09-2015, 10:47 AM

http://www.langdonsstovebolt.com/sto...=0&sort=normal

88Ironduke · 11-09-2015, 02:14 PM

I installed one Tom Langdons Weber carbs, a 32/36 progressive and it is extremely nice. The adapter fits well, you just have to work out the carb linkage but its pretty simple.

bosco200 · 11-10-2015, 12:25 PM

Thanks guys

Sixteen Tons · 11-11-2015, 05:01 PM

x2 on the Weber 32/36 and Langdon's Stovebolt site. You might be able to find the carb via CL or Ebay for a hair cheaper, but Langdon's has them set up and ready to go with the intake adaptor and linkage available as well. Worthwhile upgrade to your 250 without a doubt !!

11-08-2015, 02:30 PM	#1
bosco200 Registered User Join Date: Dec 2009 Location: Ste. Genevieve, MO Posts: 526	Carb and carb adaptor question Hey guys, so I have 72 C20 with a inline 250 and a single barrel mono jet carb, the carb is shot, I've rebuilt it multiple times and it's just doesn't have much life left to it, so I was wanting to put a 2 barrel on, and was wondering what adaptor I would need and what carb would work best, the engine is completely stock. If you could give me a link for where I could get them that would be great thanks. Posted via Mobile Device

11-09-2015, 10:05 AM	#2
bosco200 Registered User Join Date: Dec 2009 Location: Ste. Genevieve, MO Posts: 526	Re: Carb and carb adaptor question Anyone?

11-09-2015, 10:47 AM	#3
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,749	Re: Carb and carb adaptor question http://www.langdonsstovebolt.com/sto...=0&sort=normal

11-09-2015, 02:14 PM	#4
88Ironduke Registered User Join Date: Jul 2010 Location: Willingboro, NJ Posts: 489	Re: Carb and carb adaptor question I installed one Tom Langdons Weber carbs, a 32/36 progressive and it is extremely nice. The adapter fits well, you just have to work out the carb linkage but its pretty simple. __________________ Retired USAF - No rockets, no mortars, no bad guys shooting...No stress!!! My Build Thread: Project 72' Green http://67-72chevytrucks.com/vboard/s...d.php?t=587932

11-10-2015, 12:25 PM	#5
bosco200 Registered User Join Date: Dec 2009 Location: Ste. Genevieve, MO Posts: 526	Re: Carb and carb adaptor question Thanks guys

11-11-2015, 05:01 PM	#6
Sixteen Tons Registered User Join Date: Aug 2012 Location: BALTIMORE Posts: 96	Re: Carb and carb adaptor question x2 on the Weber 32/36 and Langdon's Stovebolt site. You might be able to find the carb via CL or Ebay for a hair cheaper, but Langdon's has them set up and ready to go with the intake adaptor and linkage available as well. Worthwhile upgrade to your 250 without a doubt !! __________________ Wanda - 1969 C/10 LWB 250 I6 3OTT LWB>SWB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.