Lower Shock Relocation - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chaztruett · 01-15-2016, 11:18 AM

FWIW, I used some lowering blocks, flipped and swapped the lower brackets. And, WOW, the ride of my lowered truck improved about 125%. Picked up about 2.75 Inches of travel and NO bottoming out. Did not know it could be this good. Hope this may help someone.

I had the lowering blocks as I was searching for the best ride height and then went to new springs and drop spindles. Therefore the blocks were sitting on the shelf.

01-15-2016, 11:18 AM	#1
chaztruett Registered User Join Date: Jul 2014 Location: maylene, al Posts: 73	Lower Shock Relocation FWIW, I used some lowering blocks, flipped and swapped the lower brackets. And, WOW, the ride of my lowered truck improved about 125%. Picked up about 2.75 Inches of travel and NO bottoming out. Did not know it could be this good. Hope this may help someone. I had the lowering blocks as I was searching for the best ride height and then went to new springs and drop spindles. Therefore the blocks were sitting on the shelf. __________________ 1968 StepSide GM 350 Crate / 700r4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.