Rubber floor mat from a different truck to cover whole floor and firewall - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigSix · 01-31-2016, 11:57 PM

Has anyone ordered a different floor mat than the ones made for our trucks? I believe the ones made for our trucks don't cover the firewall. I was hoping to have a thick, insulated carpet or mat that went from the firewall down to behind the bench. I feel like the one I bought for my 1991 Ram would work but I am not sure how I would fasten it to the firewall section above the transmission hump. Any ideas on how to get complete coverage of the firewall/floor in one piece are welcome. Also, I have my sound insulation pad holes welded up so I cannot use those clip any longer. Would rather have a fully interior solution. I have a heat gun.

LostMy65 · 02-01-2016, 01:13 AM

There's an aftermarket one that covers the whole cab floor, but I don't think it goes all the way up the firewall.
Check out this thread :
http://67-72chevytrucks.com/vboard/s...ighlight=floor

Bullett · 02-01-2016, 01:30 AM

I just finished my carpet/firewall mat install today. I was hoping to find a one piece carpet that covered everything but didnt find any offered. I suspect the only way to find a one piece complete cover carpet or rubber mat would be an upholstery shop.

01-31-2016, 11:57 PM	#1
BigSix Registered User Join Date: Mar 2014 Location: MD/VA/PA Or Inbetween Posts: 413	Rubber floor mat from a different truck to cover whole floor and firewall Has anyone ordered a different floor mat than the ones made for our trucks? I believe the ones made for our trucks don't cover the firewall. I was hoping to have a thick, insulated carpet or mat that went from the firewall down to behind the bench. I feel like the one I bought for my 1991 Ram would work but I am not sure how I would fasten it to the firewall section above the transmission hump. Any ideas on how to get complete coverage of the firewall/floor in one piece are welcome. Also, I have my sound insulation pad holes welded up so I cannot use those clip any longer. Would rather have a fully interior solution. I have a heat gun. Last edited by BigSix; 02-01-2016 at 12:26 AM.

02-01-2016, 01:13 AM	#2
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Rubber floor mat from a different truck to cover whole floor and firewall There's an aftermarket one that covers the whole cab floor, but I don't think it goes all the way up the firewall. Check out this thread : http://67-72chevytrucks.com/vboard/s...ighlight=floor __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

02-01-2016, 01:30 AM	#3
Bullett Registered User Join Date: Dec 2013 Location: Fairfield, Maine Posts: 302	Re: Rubber floor mat from a different truck to cover whole floor and firewall I just finished my carpet/firewall mat install today. I was hoping to find a one piece carpet that covered everything but didnt find any offered. I suspect the only way to find a one piece complete cover carpet or rubber mat would be an upholstery shop.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.