The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading > 4x4 Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-21-2016, 02:27 PM   #1
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
1970 k/20 project

Hey guys, Im currently 15 and turn 16 in a few months. I have a 1970 chevy k/20 pickup that im fixing up untill i turn 16. Anyhow the story goes like this. A guy my dad worked with used this truck untill he bought a brand spankin new one in 2012. So then he pushed this truck into the woods. We offered him $800 bucks for it and he said yes. Then the day before we were going to go get it he backed out on us saying hes gonna get it running some day. So then two years went buy and the guy called my dad saying he needs the truck gone. So my dad asked how much he wanted for it and he said no money he wanted to trade for an 18' foot car trailer my dad had. So we did the deal. We brought it home September 14, 2014. So this september we would have the truck for 2 years. And now i decided i wanted to show your guys my progress over the last year and a half.
The truck has power steering, power brakes, 350 engine and turbo 400 trans
Attached Images
  
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564

Last edited by collin70k/20; 04-21-2016 at 02:43 PM.
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 02:31 PM   #2
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

Then we we brought the truck home we took the bed off because it was beyond shot. Sitting in the woods didn't help that fact. Then after we took the bed off we stated replacing brake lines and doing body work. We did both cab corners, both rockers, and both floor pans.
Attached Images
   
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 02:35 PM   #3
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

So then after the cab was done we stared working on the frame and fixing that. Put all new cross members in. New shocks ans shock mounts and new e-brake cables. And then we painted the frame with paint call chasis saver. I recommend using this paint as well. We also added more leaf springs for towing.
Attached Images
 
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 02:38 PM   #4
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

So then after a couple months fixing the frame and cab and getting everything looking good we put another bed on. This bed came with the deal.
Attached Images
 
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 02:40 PM   #5
El Dorado Jim
Registered User
 
Join Date: Dec 2009
Location: El Dorado Ca
Posts: 3,374
Re: 1970 k/20 project

so cool. another young, old truck enthusiast,nice truck and am in for the rest of the build...
El Dorado Jim is offline   Reply With Quote
Old 04-21-2016, 02:41 PM   #6
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

So then after that we stated doing some engine work. It is a 350 small block. We tore the top half of the engine apart. We replace the plugs, wire, cap, rotor and valve cover gaskets. Then we put an aluminum intake and a holley 600 double pumper carb on it.
Attached Images
  
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 02:48 PM   #7
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

The we started doing work on the brakes and suspension. New front shocks and wheel cylinders on the back.
Attached Images
  
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 02:49 PM   #8
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

New front shocks!
Attached Images
 
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 02:52 PM   #9
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

The driver side headlight was out, but i replaced both of them right away.
Attached Images
 
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 02:53 PM   #10
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

Pic with the headlight out.
Attached Images
 
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 02:58 PM   #11
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

Then i decided i wanted to make my own back bumper. So my dad found this piece of tubing on the scrap pile at work.
Attached Images
 
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 03:01 PM   #12
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

Let the fabricating begin!
Attached Images
    
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 03:03 PM   #13
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

Pics of it on the truck!
Attached Images
  
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 03:05 PM   #14
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

Im going to lay the diamond plate across the top of the bumper and i have the piece to do it. hope to work on that this weekend.
Attached Images
 
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 03:11 PM   #15
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

My neighbor and my dad are real good friends. The neighbor told be that if I split and stack his wood for him I can have a 3 speed manual with granny gear, a 205 transfer case, and a 14 bolt rear. Trust me I worked my but off. That was a lot of wood! The automatic trans that is in the truck now doesnt shift right and the truck already has the clutch pedal in it because it came with manual from factory but the previous own put an automatic in it.
Attached Images
  
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 03:12 PM   #16
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

Here is the 14 bolt currently with 4.10 gears.
Attached Images
 
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 03:16 PM   #17
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

Last month i added cab lights I think it looks good.
Attached Images
 
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 03:18 PM   #18
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

About 2 months ago we had 4 inches of snow here in pa. So I was playing around in the field behind my grandparents house!
Attached Images
  
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 03:19 PM   #19
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

Also just got new cab mounts all the way around since I welded the new cab supports in!
Attached Images
 
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 03:24 PM   #20
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

Ok guys that is all i have for now. Ill keep you posted on finishing my bumper and on the whole truck. Hopefully going to swap out trany and transfer case and put the 14 bolt in soon. Have and questions or comments feel free to ask. Thanks for looking guys ill keep everyone posted. Also here are two pictures of the truck currently
Attached Images
  
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 04:55 PM   #21
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

Quote:
Originally Posted by El Dorado Jim View Post
so cool. another young, old truck enthusiast,nice truck and am in for the rest of the build...
thanks man
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 07:37 PM   #22
rusty76
Registered User
 
rusty76's Avatar
 
Join Date: Sep 2012
Location: Midway, NC
Posts: 3,275
Re: 1970 k/20 project

Me too. I'll ride. Cool truck.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873
The low buck build threads. Check'em out!
http://67-72chevytrucks.com/vboard/s...d.php?t=666022
My build thread
Crossmembers CC
rusty76 is offline   Reply With Quote
Old 04-21-2016, 09:21 PM   #23
DeadheadNM
Carpe manana

 
DeadheadNM's Avatar
 
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,446
Re: 1970 k/20 project

Strong work!! Thanks for posting. Great job. Glad you were able to rescue the K20.
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547
1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308

Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland
DeadheadNM is offline   Reply With Quote
Old 04-21-2016, 09:33 PM   #24
collin70k/20
Registered User
 
collin70k/20's Avatar
 
Join Date: Feb 2015
Location: Schaefferstown, PA
Posts: 202
Re: 1970 k/20 project

Quote:
Originally Posted by rusty76 View Post
Me too. I'll ride. Cool truck.
thank you
__________________
1970 Chevy K20 pulling truck 406 small block

1967 Chevy K20 daily/street truck

My daily 1970 k20 - http://67-72chevytrucks.com/vboard/s...=1#post7568564
collin70k/20 is offline   Reply With Quote
Old 04-21-2016, 09:34 PM   #25
Stocker
20' Daredevil (Ret)
 
Stocker's Avatar
 
Join Date: May 2003
Location: Jefferson State
Posts: 13,722
Re: 1970 k/20 project

This is great to see! Gives me confidence for the future of these old trucks. Congrats & thanks for your hard work and interest. I'll be watching for what comes next.

Oh btw, pic in post #20, are those factory tow hooks I see? I'm sure you know this, but they are rare & valuable.
__________________
- Mike -

1972 K20 LWB 350/350/205

RIP El Jay
Stocker is online now   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com