Arrghh... memory leak - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FLA_Instigator · 08-01-2016, 08:57 PM

I can't recall the name for the metal plate that attaches on the top of the radiator and extends over the fan. I have searched all combinations of words I can think of and am drawing a blank...

Thanks!

geezer#99 · 08-01-2016, 09:04 PM

Fan Shroud!!!

FLA_Instigator · 08-01-2016, 09:53 PM

I tried that and it isn't the part I am thinking.... the part I am thinking of is maybe 18"x18" and takes 2-4 bolts. When searching on "fan shroud" I get this stuff... If I had my truck here with me I would take a pic.

http://www.classicindustries.com/sho...nents/shrouds/

cmo71 · 08-01-2016, 10:17 PM

Are you thinking of a radiator top plate or radiator support panel?

Similar to this? -
https://www.opgi.com/common/C980152-lrg.jpg

**71swb4x4** · 08-01-2016, 10:27 PM

Are you sure it's not a fan shroud, AKA finger guard, for a 6 cylinder? Like this picture:

**LockDoc** · 08-01-2016, 10:32 PM

Quote:

Originally Posted by FLA_Instigator

I tried that and it isn't the part I am thinking.... the part I am thinking of is maybe 18"x18" and takes 2-4 bolts. When searching on "fan shroud" I get this stuff... If I had my truck here with me I would take a pic.

Try METAL FAN SHROUD Only used on the 6 cylinder manual trans trucks if I remember correctly....

LockDoc

FLA_Instigator · 08-01-2016, 10:47 PM

THANKS!!! that's it. I have scoured hundreds of photos looking for this thing. I guess what is curious is that my truck has a 305 but does have the shroud (guessing the PO added it).

much thanks! I can sleep now.

**70cst** · 08-01-2016, 11:19 PM

Thanks guys for a job well done

engineer_gregh · 08-02-2016, 08:02 AM

I would check the VIN FLA_Instigator. If it starts with CS versus CE, your truck was originally a 6 cylinder not a V8, thus the finger shroud.

firedemon · 08-02-2016, 09:13 PM

I like this one in the middle for an 8 cyl rad gives it a more finished look I think . I bought it but it didn't fit my l6 rad too wide so I made one out of stainless now I have the 8 cyl rad I put the one I bought on

firedemon · 08-02-2016, 09:14 PM

oh and I think with the core filler panel it should help more air go through the rad instead of over

FLA_Instigator · 08-03-2016, 10:42 PM

Thanks, I'll look into that. Engine compartment is next on my list of things to get in order.

08-01-2016, 08:57 PM	#1
FLA_Instigator Registered User Join Date: May 2016 Location: Orlando, FL Posts: 21	Arrghh... memory leak I can't recall the name for the metal plate that attaches on the top of the radiator and extends over the fan. I have searched all combinations of words I can think of and am drawing a blank... Thanks!

08-01-2016, 09:04 PM	#2
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,777	Re: Arrghh... memory leak Fan Shroud!!!

08-01-2016, 09:53 PM	#3
FLA_Instigator Registered User Join Date: May 2016 Location: Orlando, FL Posts: 21	Re: Arrghh... memory leak I tried that and it isn't the part I am thinking.... the part I am thinking of is maybe 18"x18" and takes 2-4 bolts. When searching on "fan shroud" I get this stuff... If I had my truck here with me I would take a pic. http://www.classicindustries.com/sho...nents/shrouds/

08-01-2016, 10:17 PM	#4
cmo71 Registered User Join Date: Dec 2012 Location: Central Valley, Ca Posts: 2	Re: Arrghh... memory leak Are you thinking of a radiator top plate or radiator support panel? Similar to this? - https://www.opgi.com/common/C980152-lrg.jpg

08-01-2016, 10:27 PM	#5
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Re: Arrghh... memory leak Are you sure it's not a fan shroud, AKA finger guard, for a 6 cylinder? Like this picture: Attached Images __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

08-01-2016, 10:47 PM	#7
FLA_Instigator Registered User Join Date: May 2016 Location: Orlando, FL Posts: 21	Re: Arrghh... memory leak THANKS!!! that's it. I have scoured hundreds of photos looking for this thing. I guess what is curious is that my truck has a 305 but does have the shroud (guessing the PO added it). much thanks! I can sleep now. Last edited by FLA_Instigator; 08-01-2016 at 11:02 PM.

08-01-2016, 11:19 PM	#8
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,377	Re: Arrghh... memory leak Thanks guys for a job well done __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

08-02-2016, 08:02 AM	#9
engineer_gregh Registered User Join Date: Feb 2012 Location: Smyrna TN Posts: 1,153	Re: Arrghh... memory leak I would check the VIN FLA_Instigator. If it starts with CS versus CE, your truck was originally a 6 cylinder not a V8, thus the finger shroud. __________________ 1971 Longbed BB Cheyenne Super 1972 Longbed SB Cheyenne Super 1972 Longbed Highlander Custom Deluxe 1975 K5 4x4 full convertible Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=645165 Greg Smyrna TN

08-02-2016, 09:13 PM	#10
firedemon Registered User Join Date: Jun 2015 Location: @ Posts: 890	Re: Arrghh... memory leak I like this one in the middle for an 8 cyl rad gives it a more finished look I think . I bought it but it didn't fit my l6 rad too wide so I made one out of stainless now I have the 8 cyl rad I put the one I bought on Attached Images

08-02-2016, 09:14 PM	#11
firedemon Registered User Join Date: Jun 2015 Location: @ Posts: 890	Re: Arrghh... memory leak oh and I think with the core filler panel it should help more air go through the rad instead of over

08-03-2016, 10:42 PM	#12
FLA_Instigator Registered User Join Date: May 2016 Location: Orlando, FL Posts: 21	Re: Arrghh... memory leak Thanks, I'll look into that. Engine compartment is next on my list of things to get in order.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.