Eaton H52 Axle Nut Tanged Washer? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DJ_Baar · 08-03-2016, 03:27 PM

I recently picked up a 1967 C20 with an Eaton H052 rear differential. I’m looking for replacement tanged washer that goes between the outer wheel bearing and the bearing nut? I can find a lot at Rock Auto but that and heard someone found for a different vehicle. I did find axle shaft seal and flange gasket. Also have not had luck with NAPA. Any assistance is appreciated, thank you in advance.

* Sorry I ask a LOT of questions, but have a LOT going on fixing-up this old truck I picked-up, it has been neglected for a long time, but worth the repairs. Just need to find some of the parts required. ;-)

R/
DJ

DJ_Baar · 08-03-2016, 07:45 PM

See link for detailed parts of Eaton H052.

http://www.66submarine.com/eatonffaxle/hubs.html

**special-K** · 08-04-2016, 05:22 AM

Is there one listed here that would work?

https://www.google.com/url?sa=t&rct=..._aPYGssxsAp0kA

DJ_Baar · 08-04-2016, 05:40 AM

Thank you Tim.

I found this, (with a little help from my Friends at work)
http://m.ebay.com/itm/New-Genuine-GM...-/181951185713

I'm on the right track. That Eaton H052 is a HD rear end and worth keeping - as long as I can get parts.

R/
DJ

08-03-2016, 03:27 PM	#1
DJ_Baar Registered User Join Date: Jul 2016 Location: New Orleans Posts: 362	Eaton H52 Axle Nut Tanged Washer? I recently picked up a 1967 C20 with an Eaton H052 rear differential. I’m looking for replacement tanged washer that goes between the outer wheel bearing and the bearing nut? I can find a lot at Rock Auto but that and heard someone found for a different vehicle. I did find axle shaft seal and flange gasket. Also have not had luck with NAPA. Any assistance is appreciated, thank you in advance. * Sorry I ask a LOT of questions, but have a LOT going on fixing-up this old truck I picked-up, it has been neglected for a long time, but worth the repairs. Just need to find some of the parts required. ;-) R/ DJ

08-03-2016, 07:45 PM	#2
DJ_Baar Registered User Join Date: Jul 2016 Location: New Orleans Posts: 362	Re: Eaton H52 Axle Nut Tanged Washer? See link for detailed parts of Eaton H052. http://www.66submarine.com/eatonffaxle/hubs.html

08-04-2016, 05:22 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Eaton H52 Axle Nut Tanged Washer? Is there one listed here that would work? https://www.google.com/url?sa=t&rct=..._aPYGssxsAp0kA __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-04-2016, 05:40 AM	#4
DJ_Baar Registered User Join Date: Jul 2016 Location: New Orleans Posts: 362	Re: Eaton H52 Axle Nut Tanged Washer? Thank you Tim. I found this, (with a little help from my Friends at work) http://m.ebay.com/itm/New-Genuine-GM...-/181951185713 I'm on the right track. That Eaton H052 is a HD rear end and worth keeping - as long as I can get parts. R/ DJ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.