i have to do it - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy68388 · 10-08-2003, 02:22 AM

well i have been here for some time. but now that im here again i have bad news. i have to sell my truck its a 86 gmc 1/2 its got a 357cid with around 50 miles on it a 700r4 with also 50 miles on it. en bolt rear dana 44 front nine inches of lift (6 in susp)(3 in body) newer exhaust true duals with only cats. and 3 inch tips.and new 35/12.5/15 general mud grabbers. i need $3000 i also have a 406 cid sitting in the grage it dosent have water pump starter dizzy, or carb it may or may not have bad rings i dont know it didnt have low.compresstion but had oil coming out of the pipes.ill let it go for $200 i live in spring valley ohio but the truck and motor is in xenia. ifanyone wants more info or would like to see it in person email me dksixpack289@aol.com or just wright me in here

Burnsman · 10-08-2003, 08:02 AM

I'd take the motor if you met me half way. I live in Meadville, Pa. Let me know. Thanks!

chevy68388 · 10-08-2003, 01:47 PM

bout how far would that be

Burnsman · 10-08-2003, 02:02 PM

I'm guessing from my place to your place would be about 4.5 hours. I was thinking of meeting somewhere in between.

Destructo · 10-08-2003, 05:54 PM

Nice truck, wish I had the money to buy it from ya. I'm currently working on my '85 K10 shortbed, just got it only a couple months ago. I have a friend who may possibly be interested in a 406, but I think he wants to just build his 350 into a 383. I'll let him know about the motor.

phantom dually · 10-08-2003, 07:47 PM

I would like to inquire abou the motor. I am in Louisville Ky and would liketo see how far you are. Thanks. Send me a PM and we can talk $$

phantom dually · 10-08-2003, 07:55 PM

Hey can you get me a zip code?? I am trying to look it up on mapquest from my zip to yours. Do you any more info on the motor as far as mileage heads internal parts?? Thanks!!

chevy68388 · 10-08-2003, 09:58 PM

i will get some new pics of the truck. i will work out a deal with people on this truck. ill see how much more i have to pay on it. but i would like to kinda keep the tires off it. if i keep the tire ill sell it for $2200

Burnsman · 10-09-2003, 07:21 AM

Whoops! I see you tried to send a PM and my box was full. I cleaned it out.

phantom dually · 10-10-2003, 08:26 PM

SOLD I'll take it!!!!! The motor that is!!!

phantom dually · 10-13-2003, 05:45 PM

any word there Chevy??

chevy68388 · 10-13-2003, 09:29 PM

i sent u a pm did u get it

phantom dually · 10-13-2003, 10:14 PM

sent one back Thanks!!

86truckhound · 11-10-2003, 08:49 PM

Is the truck still for sale??? How much without the wheels and tires??

10-08-2003, 02:22 AM	#1
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	i have to do it well i have been here for some time. but now that im here again i have bad news. i have to sell my truck its a 86 gmc 1/2 its got a 357cid with around 50 miles on it a 700r4 with also 50 miles on it. en bolt rear dana 44 front nine inches of lift (6 in susp)(3 in body) newer exhaust true duals with only cats. and 3 inch tips.and new 35/12.5/15 general mud grabbers. i need $3000 i also have a 406 cid sitting in the grage it dosent have water pump starter dizzy, or carb it may or may not have bad rings i dont know it didnt have low.compresstion but had oil coming out of the pipes.ill let it go for $200 i live in spring valley ohio but the truck and motor is in xenia. ifanyone wants more info or would like to see it in person email me dksixpack289@aol.com or just wright me in here Attached Images __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

10-08-2003, 08:02 AM	#2
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Motor I'd take the motor if you met me half way. I live in Meadville, Pa. Let me know. Thanks! __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-08-2003, 01:47 PM	#3
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	bout how far would that be __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

10-08-2003, 02:02 PM	#4
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Motor I'm guessing from my place to your place would be about 4.5 hours. I was thinking of meeting somewhere in between. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-08-2003, 07:47 PM	#6
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I would like to inquire abou the motor. I am in Louisville Ky and would liketo see how far you are. Thanks. Send me a PM and we can talk $$ __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-08-2003, 05:54 PM	#5
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Nice truck, wish I had the money to buy it from ya. I'm currently working on my '85 K10 shortbed, just got it only a couple months ago. I have a friend who may possibly be interested in a 406, but I think he wants to just build his 350 into a 383. I'll let him know about the motor.

10-08-2003, 07:55 PM	#7
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Hey can you get me a zip code?? I am trying to look it up on mapquest from my zip to yours. Do you any more info on the motor as far as mileage heads internal parts?? Thanks!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-08-2003, 09:58 PM	#8
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	i will get some new pics of the truck. i will work out a deal with people on this truck. ill see how much more i have to pay on it. but i would like to kinda keep the tires off it. if i keep the tire ill sell it for $2200 __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

10-09-2003, 07:21 AM	#9
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	PM Whoops! I see you tried to send a PM and my box was full. I cleaned it out. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-10-2003, 08:26 PM	#10
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	SOLD I'll take it!!!!! The motor that is!!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-13-2003, 05:45 PM	#11
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	any word there Chevy?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-13-2003, 09:29 PM	#12
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	i sent u a pm did u get it __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

10-13-2003, 10:14 PM	#13
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	sent one back Thanks!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

11-10-2003, 08:49 PM	#14
86truckhound Registered User Join Date: Nov 2003 Posts: 1	Still For Sale Is the truck still for sale??? How much without the wheels and tires??

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.