The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > Squarebody Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-20-2016, 02:32 PM   #1
ultrahd4me
Registered User
 
ultrahd4me's Avatar
 
Join Date: Dec 2006
Location: Gallatin, Tn
Posts: 676
Project "Candy Apple"

Well I'm passed due on getting this build thread started, so here I go. This 83 popped up on my facebook feed about 3 weeks ago. SWB, rust free, super nice paint, LS1 5.3/4l60 combo, lowered, and updated interior. My interest was peeked to say the least, so 2 phone conversations later the truck was headed to Nashville. I new upfront the truck still needed some updating but over the last 2 weeks I've made the decision to change a lot more than I originally hoped for. So my plans are made and lots of new parts ordered.

Suspension: New 4.5/6 drop only reusing the drop spindles. The current setup is a mixed match of parts that doesn't work well together. Everything will be cleaned and painted as I go.

Body: The paint is super nice 3 stage candy apple red and titanium silver, super straight and zero rust. It will get a 2 stage wet sand & buff along with new bumpers front and rear. The side trim and wheel moldings are new.

Interior: Seat and headliner are new, carpet and dash are in good shape also. The door panels, door moldings, and steering wheel are going to get replaced.

Drivetrain: 5.3/4l60 from a 2002 Tahoe. No big changes under the hood just some rewiring and detailing. I've ordered all new fan, clutch, fan shroud to replace the undersized electric fan. Also ordered the full 3 piece engine covers.

Wheel: The Foose wheels are peeling and the tires are all wrong for my plans. So new 20x8/20x10 torque thrust with 245/45 & 285/50 tires will be ready early next week.

Stay tuned the fun begins this week and hoping for a 3 week completion. I'll have better and more detailed pics as I get started.
Attached Images
     
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10
ultrahd4me is offline   Reply With Quote
Old 10-20-2016, 02:35 PM   #2
ultrahd4me
Registered User
 
ultrahd4me's Avatar
 
Join Date: Dec 2006
Location: Gallatin, Tn
Posts: 676
Re: Project "Candy Apple"

I am in need of a set of burgundy floormats. Looking for a older factory set that need restored. Thanks
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10
ultrahd4me is offline   Reply With Quote
Old 10-20-2016, 03:35 PM   #3
BB72CHEVKT
Junior Member
 
BB72CHEVKT's Avatar
 
Join Date: Mar 2007
Location: Hideaway, TX
Posts: 4,950
Re: Project "Candy Apple"

subd
__________________
71 Suburban 350/700R4 Project Trixie
72 CHEVY,Highlander,SWB,396,T400
BB72CHEVKT is offline   Reply With Quote
Old 10-22-2016, 08:22 AM   #4
SKT
Registered User
 
SKT's Avatar
 
Join Date: Oct 2014
Location: Location:
Posts: 8,444
Re: Project "Candy Apple"

.
.

Will be following along, as your theads never disappoint!

.
.
SKT is offline   Reply With Quote
Old 10-23-2016, 08:24 AM   #5
ultrahd4me
Registered User
 
ultrahd4me's Avatar
 
Join Date: Dec 2006
Location: Gallatin, Tn
Posts: 676
Re: Project "Candy Apple"

Tear down started early and was finished by noon. No big hidden surprises other than upper ball joints and 2 spring risers in the coil springs. Main goal for the rest of the weekend is to finish cleaning parts and have everything painted, I'm planning on starting reassembly by mid week.
Attached Images
     
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10
ultrahd4me is offline   Reply With Quote
Old 10-23-2016, 08:34 AM   #6
ultrahd4me
Registered User
 
ultrahd4me's Avatar
 
Join Date: Dec 2006
Location: Gallatin, Tn
Posts: 676
Re: Project "Candy Apple"

In between the tear down and cleaning parts, I took a short break to sort and inventory the first load of parts. I'm trying a few new parts suppliers on this build, and I'll give a honest review as I go. One new company I'm trying is Crown Suspension, and so far I'm really impressed.
Attached Images
  
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10
ultrahd4me is offline   Reply With Quote
Old 10-24-2016, 02:57 PM   #7
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 6,979
Re: Project "Candy Apple"

Quote:
Originally Posted by ultrahd4me View Post
I am in need of a set of burgundy floormats. Looking for a older factory set that need restored. Thanks
Just an idea if you can't find older ones to restore.

http://www.classicparts.com/1947-98-...fo/39%2D077B/#

Description states:


If you are looking for the original early model accesory floor mats, Classic Parts has what you need. These mats are exact reproductions of the original floor mats including the embossed Bow Tie logo. Each mat is produced to exact dimensions in accordance with factory specifications and die-cut to fit the original contour of the floor pan. These superior quality reproductions are produced with high grade rubber in the original grains and colors! Also featured are the original style carpet grips on the bottom of each mat which will keep the mat securely in place. These mats are originally for 62-78 Trucks, but will fit other applications. Mats are sold in pairs. Made in the USA. This is a GM Restoration Part.
Attached Images
 
TKCR is offline   Reply With Quote
Old 10-28-2016, 08:04 AM   #8
ultrahd4me
Registered User
 
ultrahd4me's Avatar
 
Join Date: Dec 2006
Location: Gallatin, Tn
Posts: 676
Re: Project "Candy Apple"

Rear suspension is back together and after a little more detailing this stage will be complete. Flip bracket, new shock extenders, new axle mounting plates, new KYB shocks, lowering block, and overload leaf removed make up the 6" drop. Party starts tonight on the front end.
Attached Images
  
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10
ultrahd4me is offline   Reply With Quote
Old 10-31-2016, 08:30 AM   #9
ultrahd4me
Registered User
 
ultrahd4me's Avatar
 
Join Date: Dec 2006
Location: Gallatin, Tn
Posts: 676
Re: Project "Candy Apple"

Finally had a productive weekend and actually got some work done. The frontend is done except for brake calipers, paint was still too wet to handle. New upper ball joints, new outer tierods, new moog 6452 springs with 1 round removed, 2-1/2 drop spindles, and new KYB shocks make up the 4-1/2 drop. Inner fenders front and rear were sprayed with 2 coats of rubber coating as well. Tires and wheels were ready Friday but I'm going to have to machine the rear spacers down to 1" to make the 285 tires work.
Attached Images
     
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10
ultrahd4me is offline   Reply With Quote
Old 10-31-2016, 09:18 PM   #10
rip2174
Registered User
 
Join Date: Apr 2013
Location: wilmington nc
Posts: 492
Re: Project "Candy Apple"

color is awesome!
rip2174 is offline   Reply With Quote
Old 11-01-2016, 02:25 PM   #11
jimboh247
Registered User
 
jimboh247's Avatar
 
Join Date: May 2011
Location: Lexington, NC
Posts: 157
Re: Project "Candy Apple"

Always in for some inspiration!
__________________
'85 SWB Silverado
jimboh247 is offline   Reply With Quote
Old 11-02-2016, 08:29 AM   #12
ultrahd4me
Registered User
 
ultrahd4me's Avatar
 
Join Date: Dec 2006
Location: Gallatin, Tn
Posts: 676
Re: Project "Candy Apple"

Finished the front reassembly last night, bled the brakes, and set her down for a little motivation. I have to say that I'm real pleased with the stance. This stage is complete and now time to move to the interior.
Attached Images
    
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10

Last edited by ultrahd4me; 11-02-2016 at 11:30 AM.
ultrahd4me is offline   Reply With Quote
Old 11-02-2016, 11:28 AM   #13
BB72CHEVKT
Junior Member
 
BB72CHEVKT's Avatar
 
Join Date: Mar 2007
Location: Hideaway, TX
Posts: 4,950
Re: Project "Candy Apple"

She looks great.
__________________
71 Suburban 350/700R4 Project Trixie
72 CHEVY,Highlander,SWB,396,T400
BB72CHEVKT is offline   Reply With Quote
Old 11-02-2016, 11:33 AM   #14
ultrahd4me
Registered User
 
ultrahd4me's Avatar
 
Join Date: Dec 2006
Location: Gallatin, Tn
Posts: 676
Re: Project "Candy Apple"

Thanks you sir.
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10
ultrahd4me is offline   Reply With Quote
Old 11-02-2016, 11:48 AM   #15
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 6,979
Re: Project "Candy Apple"

I just love the wheels you use on your trucks. Someday I would like to get wheels like that on my truck. I hate the wagon wheel looking things that I have.

Have you had any luck with the floor mats?
TKCR is offline   Reply With Quote
Old 11-02-2016, 11:52 AM   #16
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 6,979
Re: Project "Candy Apple"

Also, are you going to keep that billet grille, or try and get an OEM one?
TKCR is offline   Reply With Quote
Old 11-02-2016, 01:44 PM   #17
ultrahd4me
Registered User
 
ultrahd4me's Avatar
 
Join Date: Dec 2006
Location: Gallatin, Tn
Posts: 676
Re: Project "Candy Apple"

I'm going to keep the billet grill but remove the emblem. I have new bumpers front and rear also. That's the same thing I used on my red 87.
Attached Images
   
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10
ultrahd4me is offline   Reply With Quote
Old 11-02-2016, 04:43 PM   #18
evan
Registered User
 
evan's Avatar
 
Join Date: Jul 2005
Location: SK, Canada
Posts: 488
Re: Project "Candy Apple"

Quote:
Originally Posted by ultrahd4me View Post
I'm going to keep the billet grill but remove the emblem. I have new bumpers front and rear also. That's the same thing I used on my red 87.
Wow. The red 87 looks amazing too. Do you still have it?

By the way, I requested to follow you on Instagram.
__________________
Evan B.
evan is offline   Reply With Quote
Old 11-02-2016, 05:50 PM   #19
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: Project "Candy Apple"

Love you builds. Start with a good truck and make them great.

I like the look of the 285/50 tire in the rear. That comes out to a 31" tall tire, fills up the wheel opening really well.
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 11-02-2016, 08:47 PM   #20
TKCR
Senior Member
 
TKCR's Avatar
 
Join Date: Oct 2014
Location: Ohio
Posts: 6,979
Re: Project "Candy Apple"

Quote:
Originally Posted by ultrahd4me View Post
I'm going to keep the billet grill but remove the emblem. I have new bumpers front and rear also. That's the same thing I used on my red 87.
Man that looks nice!! But I love all the trucks you have done.
TKCR is offline   Reply With Quote
Old 11-03-2016, 07:29 AM   #21
Desert1957
Registered User
 
Desert1957's Avatar
 
Join Date: Apr 2009
Location: New Freedom Pa.
Posts: 1,335
Re: Project "Candy Apple"

I like the 285 look on the rear tires, Can you tell me more about the final wheel offset? So the new spacer width will be ???.

Just curious what the fender/frame clearance is now with the new setup and did you have to roll the lip on the quarter panel.

Thanks....
__________________
Desert
Desert1957 is offline   Reply With Quote
Old 11-03-2016, 07:41 AM   #22
ultrahd4me
Registered User
 
ultrahd4me's Avatar
 
Join Date: Dec 2006
Location: Gallatin, Tn
Posts: 676
Re: Project "Candy Apple"

I don't think the rear spacer is going to work, there's only about 3/4"-7/8" clearance between the outer bulge of the tire and the bed. I'm debating longer wheel studs and a 1/4"-3/8" spacer.
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10

Last edited by ultrahd4me; 11-04-2016 at 07:50 AM.
ultrahd4me is offline   Reply With Quote
Old 11-03-2016, 11:43 AM   #23
BB72CHEVKT
Junior Member
 
BB72CHEVKT's Avatar
 
Join Date: Mar 2007
Location: Hideaway, TX
Posts: 4,950
Re: Project "Candy Apple"

The grill will look much better without the emblem.
__________________
71 Suburban 350/700R4 Project Trixie
72 CHEVY,Highlander,SWB,396,T400
BB72CHEVKT is offline   Reply With Quote
Old 11-04-2016, 06:20 AM   #24
Desert1957
Registered User
 
Desert1957's Avatar
 
Join Date: Apr 2009
Location: New Freedom Pa.
Posts: 1,335
Re: Project "Candy Apple"

Quote:
Originally Posted by ultrahd4me View Post
I don't the rear spacer is going to work, there's only about 3/4"-7/8" clearance between the outer bulge of the tire and the bed. I'm debating longer wheel studs and a 1/4"-3/8" spacer.
Ok, For me personally I would have more peace of mind with the longer stud setup. Are you still considering this for this build?
__________________
Desert
Desert1957 is offline   Reply With Quote
Old 11-07-2016, 08:48 AM   #25
ultrahd4me
Registered User
 
ultrahd4me's Avatar
 
Join Date: Dec 2006
Location: Gallatin, Tn
Posts: 676
Re: Project "Candy Apple"

Started this weekend with plans of restoring the door panels and a full interior detail. Pulled the door panels then started the stripping and cleaning process. After 3 rounds of final cleaning the door panels were ready for restoration. 3 light coats of Bulldog, 4 light coats of SEM texture coat, and finally 5 coats of SEM napa red. New door panel trim, super nice OEM map pockets and arm rest complete this project.
I'm real pleased with the final look, but this is where the project started to spiral out of control. The seat and headliner are new, and the dash pad is nearly new, but after the door panel restoration everything else looked horrible. So next thing you know, seats are out, carpet pulled, door carpets removed, and an order placed for new parts. Definitely not what I planned, and way over budget now. But I hope it will be worth it in the end.
Attached Images
     
__________________
Follow me on Instagram: @midtennc10
Youtube channel: Midtennc10
ultrahd4me is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:16 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com