11-10-2016, 12:23 PM | #1 |
Registered User
Join Date: Nov 2011
Location: Port St. Joe Fl.
Posts: 494
|
Tranny Swap
I took my truck to a Tranny shop to have the pan gasket changed to stop a leak TH350. There were a bunch of chunks of metal and half a washer in the pan, the guy said he couldn't see where it had come from. He said he would guess the Torque Converter is coming apart. I ask what he would charge to buy and build a 700R4 with a B&M shift kit and complete install with a hydraulic lockup converter, he said $1500.oo out the door. Sound Good?
Also I can't get my 383 stroker to get past 130 degrees with my a/c running too. I have aluminum radiator with dual elec. fans.. Should I change my thermostat? |
11-10-2016, 07:06 PM | #2 |
Registered User
Join Date: Jun 2015
Location: PA
Posts: 441
|
Re: Tranny Swap
what thermostat do you have now? do the electric fans run all the time? or only when they need to/when the AC is on?
__________________
- When the Reaper makes his deal, trust in your steel - '77 C10 350/350 2/4 drop and a mild street engine |
11-10-2016, 08:07 PM | #3 |
Registered User
Join Date: Oct 2009
Location: Buhl, Idaho
Posts: 1,438
|
Re: Tranny Swap
I would pay 1500 for a 700r4 installed for my truck. Sounds like a great deal to me.
__________________
86 c30 crew cab dually 454/400 4/6 drop SOLD 1-8-11 1981 chevy K10 short Bed Scottsdale SOLD 10-26-2020 67 GMC Stepside Straight six/3 on the tree "The Peach" 2020 Silverado Double Cab LT Z71 5.3 8 speed Daily Driver K10 build http://67-72chevytrucks.com/vboard/s...d.php?t=671934 The Peach build http://67-72chevytrucks.com/vboard/s...d.php?t=733903 |
11-10-2016, 08:16 PM | #4 |
Registered User
Join Date: May 2009
Location: Good Thunder Mn.
Posts: 955
|
Re: Tranny Swap
I think that if $1500 includes everything, that seems like a good deal.
|
11-10-2016, 11:05 PM | #5 |
Registered User
Join Date: Nov 2011
Location: Port St. Joe Fl.
Posts: 494
|
Re: Tranny Swap
|
11-10-2016, 11:18 PM | #6 |
Registered User
Join Date: Apr 2013
Location: Pasadena, Maryland
Posts: 160
|
Re: Tranny Swap
I paid $1500 to have a 700r4 pulled out, rebuilt and installed. That's a good deal. What's your axle ratio?
|
11-11-2016, 10:47 AM | #7 |
Registered User
Join Date: Nov 2011
Location: Port St. Joe Fl.
Posts: 494
|
Re: Tranny Swap
|
11-11-2016, 10:49 AM | #8 |
Registered User
Join Date: Jun 2009
Location: Oroville, CA
Posts: 4,827
|
Re: Tranny Swap
I believe the 700 takes a different driveline than the th350.
|
11-11-2016, 06:45 PM | #9 |
Registered User
Join Date: Jun 2015
Location: PA
Posts: 441
|
Re: Tranny Swap
that is probably why the engine doesnt stay/get warm.
__________________
- When the Reaper makes his deal, trust in your steel - '77 C10 350/350 2/4 drop and a mild street engine |
11-11-2016, 09:00 PM | #10 |
Registered User
Join Date: Apr 2013
Location: Pasadena, Maryland
Posts: 160
|
Re: Tranny Swap
The reason I ask is with the overdrive of the 700, the engine may be lugging in top gear on the highway and your fuel mileage may be worse. My '86 with a 700 has 3:42 ratio.
|
11-15-2016, 09:46 PM | #11 | |
Registered User
Join Date: Oct 2013
Location: Shrewsbury, PA
Posts: 325
|
Re: Tranny Swap
Quote:
GT4 - 3.73 Rear Axle Gear Ratio GT5 - 4.10 Rear Axle Gear Ratio HC2 - 2.76 Rear Axle Gear Ratio HC4 - 4.56 Rear Axle Gear Ratio HC8 - 3.21 Rear Axle Gear Ratio HE3 - 3.07 Rear Axle Gear Ratio HO4 - 4.11 Rear Axle Gear Ratio |
|
11-19-2016, 03:38 PM | #12 |
Registered User
Join Date: Nov 2011
Location: Port St. Joe Fl.
Posts: 494
|
Re: Tranny Swap
I found the build sheet taped to the inside of the glove box it says the rear axle is.
Last edited by 85/Silverado; 11-19-2016 at 03:48 PM. |
11-19-2016, 09:33 PM | #13 |
Registered User
Join Date: Apr 2013
Location: Pasadena, Maryland
Posts: 160
|
Re: Tranny Swap
With a 2.73 ratio your engine rpms are going to be way low at hiway speed. Might want to stick with the th350 trans.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|