66 and 77 frame

[cottonme173]

I have a 77 c20 Single cab that I am looking to take of to rust repair. I have a buddy that has a 66 frame he is going to cut up. I was thinking about cutting the cab section out of the frame mounting casters to it a viola! A cab stand. So, question is; do they have the same bolt pattern between the two years?

Cheers and thanks in advance!

Rob

[SCOTI]

Originally Posted by cottonme173

I have a 77 c20 Single cab that I am looking to take of to rust repair. I have a buddy that has a 66 frame he is going to cut up. I was thinking about cutting the cab section out of the frame mounting casters to it a viola! A cab stand. So, question is; do they have the same bolt pattern between the two years?

Cheers and thanks in advance!

Rob

They do not. The front mounts would prob be ok; the rear mounts won't be the same. You could fab something up fairly easy though for the rears.

[cottonme173]

Originally Posted by SCOTI

They do not. The front mounts would prob be ok; the rear mounts won't be the same. You could fab something up fairly easy though for the rears.

Well that would certainly work! If at least the front match that would be easy to make something for the rear holes.