NV WTB Sport Mirror Backing Plates with Fixed Nuts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71CHEVYSHORTBED402** · 04-05-2017, 10:59 PM

Just getting ready to drill out the holes in my doors when I realized I bought a "Pair" of RH backing plates. Go figure.

A LH plate is needed as soon as possible. I'll buy a pair if necessary. Some pitting okay.

Here's what they look like. At least the RH side anyway. Thank you

**71CHEVYSHORTBED402** · 04-06-2017, 10:46 AM

ttt

**71CHEVYSHORTBED402** · 04-07-2017, 12:57 PM

I just used a tap plate as a template, so I don't need one "right away". But.........Bump.

**71CHEVYSHORTBED402** · 04-09-2017, 12:05 PM

ttt

**71CHEVYSHORTBED402** · 04-10-2017, 05:15 PM

ttt

**71CHEVYSHORTBED402** · 04-12-2017, 01:10 PM

ttt

**GR8-68** · 04-12-2017, 01:50 PM

Is this for the rectangular shaped mirrors? I may possibly have one

**71CHEVYSHORTBED402** · 04-12-2017, 01:57 PM

Quote:

Originally Posted by GR8-68

Is this for the rectangular shaped mirrors? I may possibly have one

These mirrors........thank you......
http://www.ebay.com/itm/1967-1972-ch...9VDb0G&vxp=mtr

**GR8-68** · 04-13-2017, 04:08 PM

Thats what I thought, I do have a pair of them 15.00 shipped to your door. Let me know if you want them.

**71CHEVYSHORTBED402** · 04-13-2017, 05:21 PM

Quote:

Originally Posted by GR8-68

Thats what I thought, I do have a pair of them 15.00 shipped to your door. Let me know if you want them.

Awesome dude. Looks like three times is a charm (long story). PM sent & THANK YOU for the good gesture.

**71CHEVYSHORTBED402** · 04-21-2017, 12:31 PM

Quote:

Originally Posted by GR8-68

Thats what I thought, I do have a pair of them 15.00 shipped to your door. Let me know if you want them.

Don't know what I was looking at. Seriously, I GOT TO USE MY GLASSES @ COMPUTER. But these plates suit plan B nicely.....clean & nice deal, TY. Unless I miraculously strike a LH (no longer a priority - LONG story fourth shot, and not always my eyes

) I'm just going to use K-nuts. These have my attention though, pending response: http://dragonplate.com/ecart/product...wwQaAiyg8P8HAQ

In the meantime, I carefully drilled out the plates to 1/4", and the plates work perfectly. Easy access even without fixed nuts. Sure a lot of mirror holes in these doors (11 per side). Bondo says the original owner smashed his camper mirror.

04-05-2017, 10:59 PM	#1
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,385	WTB Sport Mirror Backing Plates with Fixed Nuts Just getting ready to drill out the holes in my doors when I realized I bought a "Pair" of RH backing plates. Go figure. A LH plate is needed as soon as possible. I'll buy a pair if necessary. Some pitting okay. Here's what they look like. At least the RH side anyway. Thank you __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly guide (kit) for restoring this truck from the ground up, complete with details including full hardware descriptions. Much of the info. applies to all 67-72 GM. My build thread, with some info. about the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-06-2017, 10:46 AM	#2
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,385	Re: WTB Sport Mirror Backing Plates with Fixed Nuts ttt __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly guide (kit) for restoring this truck from the ground up, complete with details including full hardware descriptions. Much of the info. applies to all 67-72 GM. My build thread, with some info. about the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-07-2017, 12:57 PM	#3
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,385	Re: WTB Sport Mirror Backing Plates with Fixed Nuts I just used a tap plate as a template, so I don't need one "right away". But.........Bump. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly guide (kit) for restoring this truck from the ground up, complete with details including full hardware descriptions. Much of the info. applies to all 67-72 GM. My build thread, with some info. about the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-09-2017, 12:05 PM	#4
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,385	Re: WTB Sport Mirror Backing Plates with Fixed Nuts ttt __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly guide (kit) for restoring this truck from the ground up, complete with details including full hardware descriptions. Much of the info. applies to all 67-72 GM. My build thread, with some info. about the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-10-2017, 05:15 PM	#5
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,385	Re: WTB Sport Mirror Backing Plates with Fixed Nuts ttt __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly guide (kit) for restoring this truck from the ground up, complete with details including full hardware descriptions. Much of the info. applies to all 67-72 GM. My build thread, with some info. about the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-12-2017, 01:10 PM	#6
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,385	Re: WTB Sport Mirror Backing Plates with Fixed Nuts ttt __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly guide (kit) for restoring this truck from the ground up, complete with details including full hardware descriptions. Much of the info. applies to all 67-72 GM. My build thread, with some info. about the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-12-2017, 01:50 PM	#7
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: WTB Sport Mirror Backing Plates with Fixed Nuts Is this for the rectangular shaped mirrors? I may possibly have one __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

04-13-2017, 04:08 PM	#9
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: WTB Sport Mirror Backing Plates with Fixed Nuts Thats what I thought, I do have a pair of them 15.00 shipped to your door. Let me know if you want them. Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.