The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-25-2017, 09:10 AM   #1
Todd68Chevy
Senior Member
 
Todd68Chevy's Avatar
 
Join Date: Oct 2009
Location: Shelburn Indiana
Posts: 3,975
What was I thinking. Project #2

My 46 Stretch cab project is going slow so I had the brilliant idea to buy another project, thinking I could put it together as a beater using the rougher parts it came with and extra parts I already have. I am not going to call it rat rod style but some will because it is going to have rusty/ dented sheet metal. It is sitting on a S10 chassis with a fuel injected 2.8, 5 speed. The guy installed most of the kit from E-Z chassis Swap. More pictures after I unload all the loose parts. In case you have not seen it, here is my other build thread. http://67-72chevytrucks.com/vboard/s...d.php?t=383658 Thanks for looking.
Attached Images
   
__________________
Note: All parts I have for sale are also for sale locally.

I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.
Todd68Chevy is offline   Reply With Quote
Old 04-25-2017, 11:33 PM   #2
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
Re: What was I thinking. Project #2

I swear, swirlies (what the s10 ilk call those wheels) flat out SELL projects, they are a good looking wheel for stock.

looks like a good distraction haha. did the guy move the motor back any? I moved my 4.3 back almost 10 inches and truthfully could have gone another 2-3.
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Old 04-26-2017, 07:32 AM   #3
Todd68Chevy
Senior Member
 
Todd68Chevy's Avatar
 
Join Date: Oct 2009
Location: Shelburn Indiana
Posts: 3,975
Re: What was I thinking. Project #2

Quote:
Originally Posted by joedoh View Post
I swear, swirlies (what the s10 ilk call those wheels) flat out SELL projects, they are a good looking wheel for stock.

looks like a good distraction haha. did the guy move the motor back any? I moved my 4.3 back almost 10 inches and truthfully could have gone another 2-3.
I like the wheel also but I do not think I will use them because they will not fit the look that I plan on going for. They are a good looking stock wheel but I want something more old school.

No, he did not move the engine back and that is one of the things already on my list to change. The little bitty V6 is almost touching the radiator and almost all of the transmission is under the hood. Worst part is that he already had the driveshaft made so I will have to have it redone when I move the engine back. I will get more pictures but have been trying to get caught up on mowing after work. I have not even unloaded all the loose parts out of my pick up yet to see what all I have.
__________________
Note: All parts I have for sale are also for sale locally.

I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.
Todd68Chevy is offline   Reply With Quote
Old 04-26-2017, 12:29 PM   #4
Lokin4AReason
Registered User
 
Lokin4AReason's Avatar
 
Join Date: Oct 2014
Location: somewhere . . .
Posts: 974
Re: What was I thinking. Project #2

looks like a fairly solid cab and just in need of a bed w/ headlight(s). than your good to go, imo
__________________
dont want to hear excuses, i want to hear solution(s)
Lokin4AReason is offline   Reply With Quote
Old 04-27-2017, 10:14 AM   #5
Todd68Chevy
Senior Member
 
Todd68Chevy's Avatar
 
Join Date: Oct 2009
Location: Shelburn Indiana
Posts: 3,975
Re: What was I thinking. Project #2

Quote:
Originally Posted by Lokin4AReason View Post
looks like a fairly solid cab and just in need of a bed w/ headlight(s). than your good to go, imo
Well it needs a little bit more but still a real good start with some of the hard work already done.
__________________
Note: All parts I have for sale are also for sale locally.

I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.
Todd68Chevy is offline   Reply With Quote
Old 04-27-2017, 12:09 PM   #6
Todd68Chevy
Senior Member
 
Todd68Chevy's Avatar
 
Join Date: Oct 2009
Location: Shelburn Indiana
Posts: 3,975
Re: What was I thinking. Project #2

I have not had a chance to unload the loose parts yet but here are a few pictures showing how far the engine is sitting forward. Pulley is almost against the radiator and the radiator is forward of where it should be. This is One thing I plan on changing and getting it moved back.
Attached Images
    
__________________
Note: All parts I have for sale are also for sale locally.

I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.
Todd68Chevy is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:10 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com