Help! Need a new ECM for my eRod LS3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davepl · 06-03-2017, 12:50 PM

Here's the part numbers from the instruction sheet. Can anyone help me find a replacement? I've had no luck with google, gmpartsdirect, etc...

davepl · 06-04-2017, 12:30 PM

Closest I can find so far is:

https://www.summitracing.com/parts/nal-19259291

...but that's just based on a forum post I found where the guy had the same operating system as mine on it, so I still don't know for sure. Any help would be appreciated!

vannatta20 · 06-05-2017, 12:21 AM

PM and I can help. Should just need a E38 ECU. Do you have to have a Erod tune for emissions?

davepl · 06-05-2017, 02:37 PM

Thanks! But it turns out the ECM was OK after all. For some reason it would not start, then I connected to the ECM with HPTuners, then was able to start it. No idea... very weird.

I do have a copy of the original tune. It shows:

Hardware: E67, GM Gen IV
VIN: Some magic number followed by "LS3_REL7"
Operating System: 12638778

In case it does ever need replacing, what are the odds I could grab just any random E67 ECM off eBay and load that tune onto it? I'd have to buy another HPT license for it I guess, and the VIN wouldn't update, but would it take the tune?

06-03-2017, 12:50 PM	#1
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Help! Need a new ECM for my eRod LS3 Here's the part numbers from the instruction sheet. Can anyone help me find a replacement? I've had no luck with google, gmpartsdirect, etc... Attached Images __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible Last edited by davepl; 06-04-2017 at 07:59 PM.

06-04-2017, 12:30 PM	#2
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Help! Need a new ECM for my eRod LS3 Closest I can find so far is: https://www.summitracing.com/parts/nal-19259291 ...but that's just based on a forum post I found where the guy had the same operating system as mine on it, so I still don't know for sure. Any help would be appreciated! __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

06-05-2017, 12:21 AM	#3
vannatta20 Registered User Join Date: Oct 2011 Location: Las Vegas, NV Posts: 291	Re: Help! Need a new ECM for my eRod LS3 PM and I can help. Should just need a E38 ECU. Do you have to have a Erod tune for emissions?

06-05-2017, 02:37 PM	#4
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Help! Need a new ECM for my eRod LS3 Thanks! But it turns out the ECM was OK after all. For some reason it would not start, then I connected to the ECM with HPTuners, then was able to start it. No idea... very weird. I do have a copy of the original tune. It shows: Hardware: E67, GM Gen IV VIN: Some magic number followed by "LS3_REL7" Operating System: 12638778 In case it does ever need replacing, what are the odds I could grab just any random E67 ECM off eBay and load that tune onto it? I'd have to buy another HPT license for it I guess, and the VIN wouldn't update, but would it take the tune? __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.