The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-04-2017, 01:10 PM   #1
ACII
Registered User
 
Join Date: Jan 2010
Location: Germany
Posts: 301
Ticking Sound after installing long tube headers and cutouts !! ?? :-(

Hy all

after a long time i did some modifications on my LS1 :-)

I installed some ebay longtube headers and cutouts on my LS1 which is sitting in a 51 Chevy Pickup....

Before the longtubes ... i run the engine with the original headers. But all the air tubes have been removed already and the openings of the headers have been closed proberly.

With the new longtube headers installed ... the engine sound so far is nice, but i can hear a ticking noise directly at the cutouts...

The cutouts are sittting directly under the driver cab ....so with the cutouts closed i can hear the ticking noise quite clearly.

What do u think ....is that kind of ticking noise normal ??? I know the cutouts are never 100 % tight closed....so maybe thats the reason why i know can hear the ticking !!! ???

Hope to get some idea from u

Thanks a lot
Achim
ACII is offline   Reply With Quote
Old 06-04-2017, 04:54 PM   #2
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,670
Re: Ticking Sound after installing long tube headers and cutouts !! ?? :-(

Check for exhaust leaks yet?
mongocanfly is offline   Reply With Quote
Old 06-04-2017, 05:46 PM   #3
RUN GMC
Registered User
 
RUN GMC's Avatar
 
Join Date: May 2014
Location: North AL
Posts: 363
Re: Ticking Sound after installing long tube headers and cutouts !! ?? :-(

Sometimes a ticking sound can be a coil arcing to ground....fire it up in the dark at night look around your module wires and mounts to see if that could be a problem.....I was hearing a ticking on mine 2 weeks ago couldnt find it at first...then one day before I left work i raised the hood and saw my MSD Streetfire arcing to its mount....at which I looked closer it was shooting from under the coil wire(Taylor wires).....when I got home I got my old set of GM Delco wires and saw that they had a longer insulated boot than the Taylor wire had on it.....I put the Delco wire on and the arc went away but would still arc every now and then. So I put on a new factory coil and set of wires and I had no more arcing.....i did notice a paint scratch on the MSD coil that exposed metal where you plug the wire on to the coil I was wondering was that where the arc was coming from on mine.......but the sound it made was just like a ticking sound..............good luck.........
RUN GMC is offline   Reply With Quote
Old 06-04-2017, 09:05 PM   #4
davepl
Registered User
 
davepl's Avatar
 
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
Re: Ticking Sound after installing long tube headers and cutouts !! ?? :-(

I'd bet a dollar that eBay cutouts leak. For years it was near impossible to get a cutout that -didn't- leak until maybe the last 15 or so years, and I doubt that design has trickled down to the discount eBay market yet.

If they're not 100% closed, you'll have an annoying leak, so that's your issue.
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought
1969 Pontiac 2+2 427/390 4-speed Coupe
1969 Pontiac 2+2 427/390 4-speed Convertible
davepl is offline   Reply With Quote
Old 06-04-2017, 09:25 PM   #5
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Ticking Sound after installing long tube headers and cutouts !! ?? :-(

The guys all have valid options, but allow me to pose another option:

When you switch to longtubes or any tubular manifold (non-cast), your also switching to a thinner material. This material will not absorb the ticks and echoes from combustion like a cast manifold does. You may just be hearing the exhaust valve events from the exhaust port.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 06-05-2017, 04:49 AM   #6
ACII
Registered User
 
Join Date: Jan 2010
Location: Germany
Posts: 301
Re: Ticking Sound after installing long tube headers and cutouts !! ?? :-(

hy all

and thanks a lot for ur feedback !!!

as i already mentioned the engine does sound very healthy out of the engine bay....

I just can recognize / notice a ticking noise directly under my driver cab...there are sitting the cut outs...

So first of all i am happy that this ticking noise is normal and its not a failure of the engine... just a leak issue of the exhaust..

I will give it a try and remove the flap and put a cover plate on the cut outs.....to check if the ticking noise will be reduced / eliminated.

CU
Achim
ACII is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:06 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com