67-72 GMC Tailgate Fleetside ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jessewebb · 08-26-2017, 08:31 AM

I came across a GMC tailgate. I don't think it's a repop. Can anyone tell me how I can be sure? I know it's heavy and it's in great shape. All the hardware is on it also.

**clay68c10** · 08-26-2017, 09:35 AM

It should be 18ga metal, and I think all the original ones had seam sealer on the bottom edge where the spot welds are.

There may be other indications, but I don't know them.

Looks like a nice straight gate.

**71blksuper4x4** · 08-26-2017, 10:06 AM

Any spot welds through the lowered area where the handle cutout is, you can usually know by looking there and a row of spot welds going down the sides about a 1/2 inch to inch from the edge of tailgate. It looks like a repop to me from this picture so far, but I could be wrong, Trevor

jessewebb · 08-26-2017, 01:41 PM

Here's more pics. I'm leaning towards repop after the replies. Maybe these will help.

**clay68c10** · 08-26-2017, 03:22 PM

Good call on the spot welds 71, I forgot about that.

Either way, that's a nice tailgate.

rockyrivermark · 08-27-2017, 08:32 AM

Quote:

Originally Posted by clay68c10

Good call on the spot welds 71, I forgot about that.

Either way, that's a nice tailgate.

So with the visible spot welds it's original right?
Posted via Mobile Device

**71blksuper4x4** · 08-27-2017, 12:51 PM

No, still looks repop.

**71blksuper4x4** · 08-27-2017, 01:10 PM

Look for spot welds on the front side. Repops don't have spot welds that weld the front to the back panel. This is what I believe "stiffens" the gates dramatically. Don't know why they haven't ever still done them like that.

bluek5 · 08-27-2017, 02:08 PM

On the inside lower left corner there are a couple of numbers stamped in the gate. I have a couple of take off tailgates that have the stamp.

bluek5 · 08-27-2017, 02:09 PM

Another

jessewebb · 08-27-2017, 09:41 PM

Thanks guys. That helps a lot. There is spot welds under the handle and down the insides on the ends

jessewebb · 08-27-2017, 09:43 PM

That's not much of a pic of the latch but I seen what you were referring to. So it has the spot welds. So does that mean a original?

rsgt · 08-27-2017, 10:47 PM

I do not know if it helps but my original chevrolet one weighs 58 Lb

jessewebb · 08-28-2017, 03:39 PM

Thanks for all the replies. I really appreciate it. I'm going with original. It is constructed identical to my 69 Chevy. I know its original. ��

**special-K** · 08-29-2017, 09:41 AM

From what I understand, when tilgates were first introduced the spot welds for outer to inner welds were missing. That's why they got a reputation for bending easily. But theere are better welded gates being made now...and for quite a few years. There are more than one maker. Tri-Plus parts are same gauge, and as far as I know, same weight as factory.

From what I see, the factory gates are dimpled (more visible) at the spot welds across the inset and the repops aren't.

**D.PASSMORE** · 08-29-2017, 10:52 AM

Re-pops weight alot less that OE tailgates. Got a bathroom scale?

08-26-2017, 08:31 AM	#1
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	67-72 GMC Tailgate Fleetside ??? I came across a GMC tailgate. I don't think it's a repop. Can anyone tell me how I can be sure? I know it's heavy and it's in great shape. All the hardware is on it also. Attached Images __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride Last edited by jessewebb; 08-26-2017 at 08:33 AM. Reason: ad picture

08-26-2017, 09:35 AM	#2
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,996	Re: 67-72 GMC Tailgate Fleetside ??? It should be 18ga metal, and I think all the original ones had seam sealer on the bottom edge where the spot welds are. There may be other indications, but I don't know them. Looks like a nice straight gate. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-26-2017, 10:06 AM	#3
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: 67-72 GMC Tailgate Fleetside ??? Any spot welds through the lowered area where the handle cutout is, you can usually know by looking there and a row of spot welds going down the sides about a 1/2 inch to inch from the edge of tailgate. It looks like a repop to me from this picture so far, but I could be wrong, Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-26-2017, 01:41 PM	#4
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 67-72 GMC Tailgate Fleetside ??? Here's more pics. I'm leaning towards repop after the replies. Maybe these will help. Attached Images __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

08-26-2017, 03:22 PM	#5
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,996	Re: 67-72 GMC Tailgate Fleetside ??? Good call on the spot welds 71, I forgot about that. Either way, that's a nice tailgate. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

08-27-2017, 12:51 PM	#7
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: 67-72 GMC Tailgate Fleetside ??? No, still looks repop. __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-27-2017, 01:10 PM	#8
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: 67-72 GMC Tailgate Fleetside ??? Look for spot welds on the front side. Repops don't have spot welds that weld the front to the back panel. This is what I believe "stiffens" the gates dramatically. Don't know why they haven't ever still done them like that. Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

08-27-2017, 02:08 PM	#9
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 67-72 GMC Tailgate Fleetside ??? On the inside lower left corner there are a couple of numbers stamped in the gate. I have a couple of take off tailgates that have the stamp. Attached Images

08-27-2017, 02:09 PM	#10
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 67-72 GMC Tailgate Fleetside ??? Another Attached Images

08-27-2017, 09:41 PM	#11
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 67-72 GMC Tailgate Fleetside ??? Thanks guys. That helps a lot. There is spot welds under the handle and down the insides on the ends Attached Images __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

08-27-2017, 09:43 PM	#12
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 67-72 GMC Tailgate Fleetside ??? That's not much of a pic of the latch but I seen what you were referring to. So it has the spot welds. So does that mean a original? __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

08-27-2017, 10:47 PM	#13
rsgt Registered User Join Date: Apr 2009 Location: Lowell AR Posts: 360	Re: 67-72 GMC Tailgate Fleetside ??? I do not know if it helps but my original chevrolet one weighs 58 Lb __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=698292

08-28-2017, 03:39 PM	#14
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 67-72 GMC Tailgate Fleetside ??? Thanks for all the replies. I really appreciate it. I'm going with original. It is constructed identical to my 69 Chevy. I know its original. �� __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

08-29-2017, 09:41 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67-72 GMC Tailgate Fleetside ??? From what I understand, when tilgates were first introduced the spot welds for outer to inner welds were missing. That's why they got a reputation for bending easily. But theere are better welded gates being made now...and for quite a few years. There are more than one maker. Tri-Plus parts are same gauge, and as far as I know, same weight as factory. From what I see, the factory gates are dimpled (more visible) at the spot welds across the inset and the repops aren't. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-29-2017, 10:52 AM	#16
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,060	Re: 67-72 GMC Tailgate Fleetside ??? Re-pops weight alot less that OE tailgates. Got a bathroom scale? __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.