'60-66 American Auto Wire questions

[64patina]

I just bought a brand new wiring harness for me '62 and was wondering about the headlight wires, in the top corner by the master cylinder there was a plug/grommet and on the replacement it seems like the new wires just run right through no plug, are people just running it like that or putting a plug in?

[Clyde65]

I have done both actually. If a show vehicle then get a plug.

[fredhlynch2]

Like 64 Patina I have been wondering about the same thing. Will run a new harness soon and would rather use something that looks professional as opposed to typical hardware store rubber grommets. Any sources for what the pros use to bundle wires and pass through the firewall (with some weather protection) would be very helpful.

[rvrfoot]

Put a plug in it.

[The Rocknrod]

I think the one your referring to is this one: https://www.americanautowire.com/sho...tor-kit-9-wire

[PGSigns]

All that was in my AAW kit I used on the 65. Some assembly required. What kit did you get? I used the classic update kit for these trucks.
Jimmy

[bj383ss]

Mine had the plug as well.

You can see in this pic I don't have the headlight harness plugged in.

20170914_144344 by bjohnson388, on Flickr

Bret

[Tonys1963]

mine has the plug but did not come with the rubber gromet

[rvrfoot]

When you buy the wire harness the rubber is not in the kit.

[lsett]

I was able to use the original grommet. It wrapped perfectly around the new harness.

[rvrfoot]

Get her done make it look nice LOL

[72cs20]

I too used the AAW 60-66 classic update harness with my 62. The kit comes with all the plugs needed but not the grommets. You can get the correct grommets from any of the vendors that sell 60-66 parts. They will likely have all of them in kit form.

[64patina]

Thanks for all the feedback! my kit didn't come with the plug but I'm going to look into getting one

[64patina]

Originally Posted by PGSigns

All that was in my AAW kit I used on the 65. Some assembly required. What kit did you get? I used the classic update kit for these trucks.
Jimmy

I got the same one man

[64patina]

Originally Posted by rvrfoot

Get her done make it look nice LOL

That is the plan hopefully it works out! lol

[64patina]

Originally Posted by The Rocknrod

I think the one your referring to is this one: https://www.americanautowire.com/sho...tor-kit-9-wire

thats exactly what I'm after man thanks!

[Brad54]

Quick tip: When you do the instrument cluster wiring, re-use the metal light sockets. Use the new connectors in the AAW kit, but use them with the original metal sockets that snap into the back of the instrument cluster.

That's the only complaint I had with my kit--the plastic light sockets left a lot to be desired.
The rest of the kit was top-notch!
-Brad

[DakotaKid]

One thing i havent had time to figure out yet is the wiper wiring on mine. I have a 62 and the plug is right but the second i put the fuse in it it pops the fuse.

Anyone know anything about what changes need to be made for this? they are just the single speed 62 wipers.

And i am using the AAW kit.

[Brad54]

DeD short inside the switch would cause that to pop.
A dead short wife would also do if.
I had the same problem with a factory spot light.

[rvrfoot]

Originally Posted by bj383ss

Mine had the plug as well.

You can see in this pic I don't have the headlight harness plugged in.

20170914_144344 by bjohnson388, on Flickr

Bret

Very cleeeeeeeeeeeeeeeeeen.

[DakotaKid]

Brad, i guess thats possible, but it worked before i changed the harness thats whats confusing me, and im usng the single speed wiper, is that an issue?