swap ? ecm - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4x4k30 · 11-04-2017, 05:03 PM

I bought a 2002 Tahoe with a 5.3 but also I had bought a 2007 1500 5.3 well I need to know if the 02 wiring harness and ecm will work on a 2007 ?

BR3W CITY · 11-04-2017, 06:52 PM

02 = GenIII
07= GenIV
Not the same.

4x4k30 · 11-04-2017, 07:06 PM

ok thanks

ls1nova71 · 11-04-2017, 08:22 PM

Thats the case most of the time, but they made both engines in '07, so if its out of a Silverado Clasic or a van it will be a GEN 3 engine. You should be able to tell them apart since the crank sensor and knock sensors are in different spots on the 3 than the 4.

izzy_Britton · 11-05-2017, 12:35 AM

you can usually tell the genIII from the genIV by the color of the crank position sensor if your engine is mostly apart. The genIII's should have a black crank position sensor where the genIV should be white or grey.

note: crank position sensor is hidden behind starter.

11-04-2017, 05:03 PM	#1
4x4k30 Registered User Join Date: Jun 2003 Location: ga Posts: 630	swap ? ecm I bought a 2002 Tahoe with a 5.3 but also I had bought a 2007 1500 5.3 well I need to know if the 02 wiring harness and ecm will work on a 2007 ? __________________ 4x4k30 if trouble was money i would have plenty

11-04-2017, 06:52 PM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: swap ? ecm 02 = GenIII 07= GenIV Not the same. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

11-04-2017, 07:06 PM	#3
4x4k30 Registered User Join Date: Jun 2003 Location: ga Posts: 630	Re: swap ? ecm ok thanks __________________ 4x4k30 if trouble was money i would have plenty

11-04-2017, 08:22 PM	#4
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: swap ? ecm Thats the case most of the time, but they made both engines in '07, so if its out of a Silverado Clasic or a van it will be a GEN 3 engine. You should be able to tell them apart since the crank sensor and knock sensors are in different spots on the 3 than the 4. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

11-05-2017, 12:35 AM	#5
izzy_Britton Registered User Join Date: Apr 2013 Location: Nor-Cal Posts: 632	Re: swap ? ecm you can usually tell the genIII from the genIV by the color of the crank position sensor if your engine is mostly apart. The genIII's should have a black crank position sensor where the genIV should be white or grey. note: crank position sensor is hidden behind starter. __________________ WHO_DCTC - Wifes 05 Z-71 Build - Now defunct as she decided she wants an Escalade too Cream Puff - LS'd Square - Slow going on the back burner Tripple Threat - 3 Wrecks for the price of one build thread Project Delongdium - Step-Sons Plastic Clad 2003 Avalanche - DONE and Delivered.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.