|
11-11-2017, 07:19 PM
|
#1 |
|
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
wiper switch issues
Wiper switch decided to give me some issues, I won’t turn off for some reason. I lightly tapped it with a wrench and it worked for a few minutes then stopped and to replace it. Since the 92 S10 column I’m now using has the controls built in can it be wired directly to the wiper motor? I’ve been scouring the internet but can’t find anything that references it. I have a two speed intermittent wiper motor.
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. Last edited by mobileortho; 11-11-2017 at 08:43 PM. |
|
|
|
11-11-2017, 08:17 PM
|
#2 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: wiper switch issues
You would have to check the wiring diagram for the rig that donated that multi use setup to see what is involved in making it work. My guess is that it controls relays that control the wipers on the donor rig as those switches are rather delicate in their capacity to handle amps.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
11-12-2017, 02:02 PM
|
#3 |
|
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: wiper switch issues
i have the same head on my turn indicator, i tried to ohm the switch out without any luck
if you can ohm the switch you should be able to use it to control relays
__________________
cool, an ogre smiley  Ogre's 58 Truk buildhow to put your truck year and build thread into your signature shop air compressor timer |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
