Need a door window channel for my 48. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MARTINSR · 01-29-2018, 02:08 AM

I just found that I am missing the rear window channel on the drivers door. The one that screws in over the top of the latch. They are different side to side. If you look at the bottom of the channel in my photo you can see it leans to the right, that is for the right door, I need the one that leans to the left.

Brian

e015475 · 01-29-2018, 12:30 PM

Chevs of the 40's has them.
Item #3685369 47^50

MARTINSR · 01-29-2018, 12:50 PM

ahhhhhhhh thanks! I still would like an original one but that will do it too.

https://www.chevsofthe40s.com/detail...ront_Wide.html

Brian

e015475 · 01-29-2018, 01:00 PM

My truck project is about four years old now, and some of the parts that I squirreled away when I first got the truck are proving difficult to find.

Just spent $80 for some window channel that I already have somewhere, but can't find. After a while I just break down and buy the part I need because I can't afford to spend any more time looking for it!

If you don't have any luck on the board, you might try Mothertrucker in Tucson, or Paul's pickup parts for some used ones.

Good luck,

Phil

e015475 · 01-29-2018, 01:14 PM

Classic Parts has them too. This is a right, but I imagine they have a left tool

Part Number 03-916

MARTINSR · 01-29-2018, 03:31 PM

Thanks guys, if I have to get a repro you have giving me some places, thanks.

I did just order the special screws and nuts for the lower corner of those window frames.

Brian

**mr48chev** · 01-29-2018, 07:12 PM

I've got a number of 47/50 doors that I accumulated and most every one is missing that piece. I think most of the innards of those doors got nabbed to turn later doors in to on piece window doors when NSRA had the 48 and earlier cut off date as far as year model for entries.

crossfire84 · 01-30-2018, 04:50 PM

I have a spare if you want it, just pay for shipping.Its from a 50.

MARTINSR · 01-30-2018, 06:29 PM

I PMed you, heck yeah! Is there anything you need?

Brian

J48chevy · 01-30-2018, 11:05 PM

I also have one as well from a 48. Would do the same. Pay shipping and it is yours.

MARTINSR · 01-31-2018, 01:25 AM

Quote:

Originally Posted by J48chevy

I also have one as well from a 48. Would do the same. Pay shipping and it is yours.

Cool, is it as rusty as Crossfires?

Brian

J48chevy · 01-31-2018, 08:42 AM

No. I will get pics later for you

MARTINSR · 01-31-2018, 11:09 AM

Cool!

Brian

J48chevy · 01-31-2018, 11:35 AM

Here is a pic.

J48chevy · 01-31-2018, 11:36 AM

One more.

MARTINSR · 01-31-2018, 05:12 PM

Thank you guys so much, in looking at them it's a toss up so to pick one I googled both of where you live and Crossfire is closer so I will bother him with it.

Brian

J48chevy · 01-31-2018, 06:42 PM

Sounds good.

crossfire84 · 02-05-2018, 05:20 PM

Your part is on the way, went out today USPS, enjoy.

MARTINSR · 02-05-2018, 06:39 PM

Quote:

Originally Posted by crossfire84

Your part is on the way, went out today USPS, enjoy.

Thanks so much, how much and your paypal name please, you can send me PM on this.

Brian

01-29-2018, 02:08 AM	#1
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Need a door window channel for my 48. I just found that I am missing the rear window channel on the drivers door. The one that screws in over the top of the latch. They are different side to side. If you look at the bottom of the channel in my photo you can see it leans to the right, that is for the right door, I need the one that leans to the left. Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

01-29-2018, 12:30 PM	#2
e015475 Registered User Join Date: Nov 2013 Location: Show Low, Arizona Posts: 778	Re: Need a door window channel for my 48. Chevs of the 40's has them. Item #3685369 47^50

01-29-2018, 01:00 PM	#4
e015475 Registered User Join Date: Nov 2013 Location: Show Low, Arizona Posts: 778	Re: Need a door window channel for my 48. My truck project is about four years old now, and some of the parts that I squirreled away when I first got the truck are proving difficult to find. Just spent $80 for some window channel that I already have somewhere, but can't find. After a while I just break down and buy the part I need because I can't afford to spend any more time looking for it! If you don't have any luck on the board, you might try Mothertrucker in Tucson, or Paul's pickup parts for some used ones. Good luck, Phil

01-29-2018, 01:14 PM	#5
e015475 Registered User Join Date: Nov 2013 Location: Show Low, Arizona Posts: 778	Re: Need a door window channel for my 48. Classic Parts has them too. This is a right, but I imagine they have a left tool Part Number 03-916

01-29-2018, 03:31 PM	#6
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Need a door window channel for my 48. Thanks guys, if I have to get a repro you have giving me some places, thanks. I did just order the special screws and nuts for the lower corner of those window frames. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

01-29-2018, 12:50 PM	#3
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Need a door window channel for my 48. ahhhhhhhh thanks! I still would like an original one but that will do it too. https://www.chevsofthe40s.com/detail...ront_Wide.html Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

01-29-2018, 07:12 PM	#7
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: Need a door window channel for my 48. I've got a number of 47/50 doors that I accumulated and most every one is missing that piece. I think most of the innards of those doors got nabbed to turn later doors in to on piece window doors when NSRA had the 48 and earlier cut off date as far as year model for entries. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

01-30-2018, 04:50 PM	#8
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,751	Re: Need a door window channel for my 48. I have a spare if you want it, just pay for shipping.Its from a 50. Attached Images __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

01-30-2018, 06:29 PM	#9
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Need a door window channel for my 48. I PMed you, heck yeah! Is there anything you need? Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

01-30-2018, 11:05 PM	#10
J48chevy Registered User Join Date: Jun 2013 Location: Michigan Posts: 304	Re: Need a door window channel for my 48. I also have one as well from a 48. Would do the same. Pay shipping and it is yours. __________________ My Build: 1948 Chevy Thriftmaster. Mustang 2 front end, LS1, 700R trans, Explorer Rear end. http://http://67-72chevytrucks.com/vboard/showthread.php?t=606670

01-31-2018, 08:42 AM	#12
J48chevy Registered User Join Date: Jun 2013 Location: Michigan Posts: 304	Re: Need a door window channel for my 48. No. I will get pics later for you __________________ My Build: 1948 Chevy Thriftmaster. Mustang 2 front end, LS1, 700R trans, Explorer Rear end. http://http://67-72chevytrucks.com/vboard/showthread.php?t=606670

01-31-2018, 11:09 AM	#13
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Need a door window channel for my 48. Cool! Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

01-31-2018, 11:35 AM	#14
J48chevy Registered User Join Date: Jun 2013 Location: Michigan Posts: 304	Re: Need a door window channel for my 48. Here is a pic. Attached Images __________________ My Build: 1948 Chevy Thriftmaster. Mustang 2 front end, LS1, 700R trans, Explorer Rear end. http://http://67-72chevytrucks.com/vboard/showthread.php?t=606670

01-31-2018, 11:36 AM	#15
J48chevy Registered User Join Date: Jun 2013 Location: Michigan Posts: 304	Re: Need a door window channel for my 48. One more. Attached Images __________________ My Build: 1948 Chevy Thriftmaster. Mustang 2 front end, LS1, 700R trans, Explorer Rear end. http://http://67-72chevytrucks.com/vboard/showthread.php?t=606670

01-31-2018, 05:12 PM	#16
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Need a door window channel for my 48. Thank you guys so much, in looking at them it's a toss up so to pick one I googled both of where you live and Crossfire is closer so I will bother him with it. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"



Register or Log In To remove these advertisements.

01-31-2018, 06:42 PM	#17
J48chevy Registered User Join Date: Jun 2013 Location: Michigan Posts: 304	Re: Need a door window channel for my 48. Sounds good. __________________ My Build: 1948 Chevy Thriftmaster. Mustang 2 front end, LS1, 700R trans, Explorer Rear end. http://http://67-72chevytrucks.com/vboard/showthread.php?t=606670

02-05-2018, 05:20 PM	#18
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,751	Re: Need a door window channel for my 48. Your part is on the way, went out today USPS, enjoy. __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.