lowering advise needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daturbosix · 02-12-2018, 08:27 PM

ive had a few 88-98 trucks that ive lowered, never a "square body."
i picked up a 87 halfton 2wd suburban recently, and want to drop it.

how, what, brand?

i dont want to lay frame, but i want it to be lowered. and without air. id like to keep the nice ride too and not make it seem like i have 2x4s where the springs used to be, so on these vehicles, whats the go to way? spindles and flip kit? spindles and drop hangers/shackles?

sorry for the noob question, but i do appreciate the answers as the search feature here doesnt seem to get me my answers quickly.

SCOTI · 02-13-2018, 12:52 PM

Spindles & shackles/hangers if you're just wanting a mild drop (2.5"/4"). A flip kit is 'usually' too much drop for Burbs out back & creates headaches. But, if you want to go for more drop, the flip is the option.

daturbosix · 02-13-2018, 02:09 PM

what does a flip kit gain you drop wise on these? is it 5 like the 88-98s?

SCOTI · 02-13-2018, 03:21 PM

Quote:

Originally Posted by daturbosix

what does a flip kit gain you drop wise on these? is it 5 like the 88-98s?

It depends on the quantity of leafs in the spring pack. The more leafs it has, the greater the amount of drop from where it currently sits. A quick check would be to measure the spring pack & add 1.5" to it to get an idea of the drop.

RDrancher · 02-16-2018, 07:24 PM

Mine is flipped and too low for normal driving without a small notch , lift shackles, air shocks or bags...or a combination of a couple of those options. I have mid-priced air shocks and they blew out internally pretty quick with a full tank, kids in the back and a full ice chest. I will be going with 1" lift shackles and a helper bag setup of some sort.

As an aside...the front is lowered with 2.5" spindles and one coil cut. The flipped rear is a bit lower than the front without air in the shocks.

BaggedRanger · 02-17-2018, 04:16 AM

Spindles will maintain your ride on the front since you are just lifting the wheel up you aren't changing spring rates. Shackles in the rear should be good. Spindles will get you a 3" drop but you will need a 17 or bigger to clear the lower control arm.

daturbosix · 02-17-2018, 09:59 AM

Quote:

Originally Posted by BaggedRanger

Spindles will maintain your ride on the front since you are just lifting the wheel up you aren't changing spring rates. Shackles in the rear should be good. Spindles will get you a 3" drop but you will need a 17 or bigger to clear the lower control arm.

well the problem is, i plan on keeping 15" wheels.

RDrancher · 02-17-2018, 10:33 AM

Quote:

Originally Posted by daturbosix

well the problem is, i plan on keeping 15" wheels.

Good man! I'm not a fan of big wheels. Western Chassis 2.5" spindles with 3.75" backspace wheels...no grinding for wheel clearance.

I was going through my bookmarks this morning and found a couple good posts from Koz1 on the lowering subject. http://67-72chevytrucks.com/vboard/s...6&postcount=22 and http://67-72chevytrucks.com/vboard/s...67&postcount=4

02-12-2018, 08:27 PM	#1
daturbosix Registered User Join Date: Mar 2016 Location: aurora, il Posts: 16	lowering advise needed ive had a few 88-98 trucks that ive lowered, never a "square body." i picked up a 87 halfton 2wd suburban recently, and want to drop it. how, what, brand? i dont want to lay frame, but i want it to be lowered. and without air. id like to keep the nice ride too and not make it seem like i have 2x4s where the springs used to be, so on these vehicles, whats the go to way? spindles and flip kit? spindles and drop hangers/shackles? sorry for the noob question, but i do appreciate the answers as the search feature here doesnt seem to get me my answers quickly. __________________ 1995 C1500 RCSB

02-13-2018, 12:52 PM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	Re: lowering advise needed Spindles & shackles/hangers if you're just wanting a mild drop (2.5"/4"). A flip kit is 'usually' too much drop for Burbs out back & creates headaches. But, if you want to go for more drop, the flip is the option. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-13-2018, 02:09 PM	#3
daturbosix Registered User Join Date: Mar 2016 Location: aurora, il Posts: 16	Re: lowering advise needed what does a flip kit gain you drop wise on these? is it 5 like the 88-98s? __________________ 1995 C1500 RCSB

02-16-2018, 07:24 PM	#5
RDrancher Registered User Join Date: Aug 2014 Location: Decatur, Texas Posts: 673	Re: lowering advise needed Mine is flipped and too low for normal driving without a small notch , lift shackles, air shocks or bags...or a combination of a couple of those options. I have mid-priced air shocks and they blew out internally pretty quick with a full tank, kids in the back and a full ice chest. I will be going with 1" lift shackles and a helper bag setup of some sort. As an aside...the front is lowered with 2.5" spindles and one coil cut. The flipped rear is a bit lower than the front without air in the shocks. __________________ Romans 10:9 - The Truth

02-17-2018, 04:16 AM	#6
BaggedRanger Registered User Join Date: Feb 2012 Location: Sandy Eggo, CA Posts: 183	Re: lowering advise needed Spindles will maintain your ride on the front since you are just lifting the wheel up you aren't changing spring rates. Shackles in the rear should be good. Spindles will get you a 3" drop but you will need a 17 or bigger to clear the lower control arm.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.