55-59 stock steering column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffs56 · 04-24-2018, 09:08 PM

Hey guys I’ve been looking for a stock steering column, cuz mine was cut off right at the base. I have a 56 Chevy truck. And the column I found is out of a 58-59 gmc. Will that column work in mine? Thank you

**paulspickupparts** · 04-25-2018, 05:13 PM

It will bolt up but the column is shorter as the 57-59 Chevy GMC trucks use a dish steering wheel while the 55 56 have a flat steering wheel and a longer column.

jeffs56 · 04-25-2018, 06:19 PM

Awesome thank you. Shorter my be better, more room for my gut lol

jeffs56 · 04-28-2018, 06:30 PM

Hey guys I was told today I can remove the 4 bolts at the bottom of the stock box and pull my steering shaft out thru there and just replace the shaft. Is this true? Anyone have any info on the thank you

_Ogre · 04-29-2018, 01:54 PM

yes, the shaft only. you still need the housing that covers the shaft.
i'll go out on a limb and say that was cut too

jeffs56 · 04-29-2018, 05:34 PM

Yea it was cut off right at the base as well. Prob no way to fix that is there?

mikebte · 05-29-2018, 06:27 PM

Are you still looking for a Stock Column? Mine is out of a 59 Chevy. I have replaced mine and don't need the stock set up any more.

04-24-2018, 09:08 PM	#1
jeffs56 Registered User Join Date: May 2015 Location: Bakersfield California Posts: 301	55-59 stock steering column Hey guys I’ve been looking for a stock steering column, cuz mine was cut off right at the base. I have a 56 Chevy truck. And the column I found is out of a 58-59 gmc. Will that column work in mine? Thank you

04-25-2018, 05:13 PM	#2
paulspickupparts Senior Member Join Date: Sep 2011 Location: Seward Nebraska Posts: 1,596	Re: 55-59 stock steering column It will bolt up but the column is shorter as the 57-59 Chevy GMC trucks use a dish steering wheel while the 55 56 have a flat steering wheel and a longer column.

04-25-2018, 06:19 PM	#3
jeffs56 Registered User Join Date: May 2015 Location: Bakersfield California Posts: 301	Re: 55-59 stock steering column Awesome thank you. Shorter my be better, more room for my gut lol

04-28-2018, 06:30 PM	#4
jeffs56 Registered User Join Date: May 2015 Location: Bakersfield California Posts: 301	Re: 55-59 stock steering column Hey guys I was told today I can remove the 4 bolts at the bottom of the stock box and pull my steering shaft out thru there and just replace the shaft. Is this true? Anyone have any info on the thank you

04-29-2018, 01:54 PM	#5
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: 55-59 stock steering column yes, the shaft only. you still need the housing that covers the shaft. i'll go out on a limb and say that was cut too __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

04-29-2018, 05:34 PM	#6
jeffs56 Registered User Join Date: May 2015 Location: Bakersfield California Posts: 301	Re: 55-59 stock steering column Yea it was cut off right at the base as well. Prob no way to fix that is there?

05-29-2018, 06:27 PM	#7
mikebte Registered User Join Date: Oct 2011 Location: Tucson, AZ Posts: 639	Re: 55-59 stock steering column Are you still looking for a Stock Column? Mine is out of a 59 Chevy. I have replaced mine and don't need the stock set up any more.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.