Will a 88-91 dash bezel fit and 85? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SunSoaked · 05-23-2018, 11:12 AM

I pulled a nice bezel off an 89 burb to use as a donor for my autometer guages. I later realized it has the DIN radio configuration and my 85 is the knob style. No big deal but it looks like that corner area of the bezel is slightly betterdifferent and may not follow the contour of the metal dash.
Thanks for the help.

aggie91 · 05-23-2018, 03:28 PM

It should bolt up fine. The metal behind the bezel would have to be but to use a DIN style radio if that is what you want. You could fab up a piece of textured ABS to fill the DIN hole in the bezel if you want to keep the knob style radio.

Pontiac1976 · 05-24-2018, 10:35 PM

http://bowtieguy.proboards.com/threa...ce-bezels-fits
This may help

Irish1941 · 05-24-2018, 11:30 PM

Will fit 100%. Dash steel never changed other than 1.5 DIN radio opening.
89-91 is nice option if your dash has been hacked for aftermarket radio.

05-23-2018, 11:12 AM	#1
SunSoaked Registered User Join Date: Dec 2011 Location: Yuma Arizona Posts: 1,525	Will a 88-91 dash bezel fit and 85? I pulled a nice bezel off an 89 burb to use as a donor for my autometer guages. I later realized it has the DIN radio configuration and my 85 is the knob style. No big deal but it looks like that corner area of the bezel is slightly betterdifferent and may not follow the contour of the metal dash. Thanks for the help. Attached Images

05-23-2018, 03:28 PM	#2
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Will a 88-91 dash bezel fit and 85? It should bolt up fine. The metal behind the bezel would have to be but to use a DIN style radio if that is what you want. You could fab up a piece of textured ABS to fill the DIN hole in the bezel if you want to keep the knob style radio. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

05-24-2018, 10:35 PM	#3
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 766	Re: Will a 88-91 dash bezel fit and 85? http://bowtieguy.proboards.com/threa...ce-bezels-fits This may help __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

05-24-2018, 11:30 PM	#4
Irish1941 Registered User Join Date: Nov 2012 Location: Los Angeles, CA Posts: 450	Re: Will a 88-91 dash bezel fit and 85? Will fit 100%. Dash steel never changed other than 1.5 DIN radio opening. 89-91 is nice option if your dash has been hacked for aftermarket radio.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.