LTB Fender Flares - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72longbed* · 11-13-2003, 06:29 AM

Anybody know who makes a good, exact fit fender flare for a 1990 GMC Sierra 4x4 Short Bed? Is GM the only company that fits all the contours of the stock fenders? Looking for front and rears.

Thanks,

72

chevynut · 11-28-2003, 06:21 PM

I have a set of brand new factory GM fender flares for 88-98 Chevy/GMC 4x4 trucks that I was going to use when I lifted my truck. I no longer have the lift and would like to sell the flares.

They are not in the original boxes anymore but are brand new.

I would let them go for $150 plus shipping.

Let me know and I can take some pics if needed.

Thanks,

*72longbed* · 11-28-2003, 09:55 PM

Mike,
I'm very interested if it's a NEW set of front and back flares. Can you take some pics and send to me at:

philwec@fast.net

Thank you,

72longbed

phantom dually · 11-29-2003, 01:53 AM

If 72 longbed dont want them I will pay asap!! Thanks

*72longbed* · 11-29-2003, 02:47 PM

phantom dually,

One thing I don't appreciate is what I call a "bottom feeder"!! I hope you will respect that this is my Thread and it is I that has searched for a long time to find the parts I am looking for here! I have seen this happen before, and I hope you or anyone else doesn't attempt to buy these "out from under me" until I have passed up my opportunity first, for that will bring a $hitload of trouble your way!

Lets just all be careful here that we respect each other properly.

Thank you.

72longbed

phantom dually · 11-30-2003, 02:21 AM

If you read my post it clearly says that IF 72longbed doesnt want them I will pay asap. This means that if you dont want them I do. Do not threaten me in any way because I highly doubt it that you can do sh!t anyway. Further more I really dont appreciate your rude comments that could have been sent in a PM form. Sounds like your trying to push your way around here but Im not intimidated. What possible trouble could you bring me from PA to KY?

*72longbed* · 11-30-2003, 12:53 PM

p.d.
I did not threaten you, and I'm sorry if you took it that way. I was only refering to the Administrative sanctions that are available against those who violate the rules of the Board. I don't feel that you have violated any rules at this time. The wording of your response to my thread appeared to say you would take them now, no questions asked. I have had a couple of experiences on this Board where other members have gone behind my back to 'undermine' a sale. My response was more of a general warning to those who might try to do this again.

I'm posting this message to you in this Thread so everyone can see that I appologize to you for my over sensitive position lately when it comes to purchases on this Board. It sticks with a person when they get screwed, and I guess I need to chill about it.

Again, sorry for my harsh words.

72

*72longbed* · 11-30-2003, 01:19 PM

Mike,
they look good, I'll buy them. My zip is 19525, please let me know how much shipping is.

Thank you,

72longbed

chevynut · 11-30-2003, 05:08 PM

will get you shipping cost tomorrow when I go to work.

Thanks, Mike

11-13-2003, 06:29 AM	#1
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	LTB Fender Flares Anybody know who makes a good, exact fit fender flare for a 1990 GMC Sierra 4x4 Short Bed? Is GM the only company that fits all the contours of the stock fenders? Looking for front and rears. Thanks, 72

11-28-2003, 06:21 PM	#2
chevynut Registered User Join Date: Sep 2000 Location: Tampa, FL. USA Posts: 171	I have a set of brand new factory GM fender flares for 88-98 Chevy/GMC 4x4 trucks that I was going to use when I lifted my truck. I no longer have the lift and would like to sell the flares. They are not in the original boxes anymore but are brand new. I would let them go for $150 plus shipping. Let me know and I can take some pics if needed. Thanks, __________________ Mike 1989 C1500 SWB Reg Cab 2003 Chevy Tahoe Z-71 70 Camaro RS/SS - 454

11-28-2003, 09:55 PM	#3
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Fender Flares Mike, I'm very interested if it's a NEW set of front and back flares. Can you take some pics and send to me at: philwec@fast.net Thank you, 72longbed

11-29-2003, 01:53 AM	#4
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	If 72 longbed dont want them I will pay asap!! Thanks __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

11-29-2003, 02:47 PM	#5
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	phantom dually phantom dually, One thing I don't appreciate is what I call a "bottom feeder"!! I hope you will respect that this is my Thread and it is I that has searched for a long time to find the parts I am looking for here! I have seen this happen before, and I hope you or anyone else doesn't attempt to buy these "out from under me" until I have passed up my opportunity first, for that will bring a $hitload of trouble your way! Lets just all be careful here that we respect each other properly. Thank you. 72longbed

11-30-2003, 02:21 AM	#6
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	If you read my post it clearly says that IF 72longbed doesnt want them I will pay asap. This means that if you dont want them I do. Do not threaten me in any way because I highly doubt it that you can do sh!t anyway. Further more I really dont appreciate your rude comments that could have been sent in a PM form. Sounds like your trying to push your way around here but Im not intimidated. What possible trouble could you bring me from PA to KY? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

11-30-2003, 12:53 PM	#7
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	p.d. I did not threaten you, and I'm sorry if you took it that way. I was only refering to the Administrative sanctions that are available against those who violate the rules of the Board. I don't feel that you have violated any rules at this time. The wording of your response to my thread appeared to say you would take them now, no questions asked. I have had a couple of experiences on this Board where other members have gone behind my back to 'undermine' a sale. My response was more of a general warning to those who might try to do this again. I'm posting this message to you in this Thread so everyone can see that I appologize to you for my over sensitive position lately when it comes to purchases on this Board. It sticks with a person when they get screwed, and I guess I need to chill about it. Again, sorry for my harsh words. 72

11-30-2003, 01:19 PM	#8
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	chevynut Mike, they look good, I'll buy them. My zip is 19525, please let me know how much shipping is. Thank you, 72longbed

11-30-2003, 05:08 PM	#9
chevynut Registered User Join Date: Sep 2000 Location: Tampa, FL. USA Posts: 171	will get you shipping cost tomorrow when I go to work. Thanks, Mike __________________ Mike 1989 C1500 SWB Reg Cab 2003 Chevy Tahoe Z-71 70 Camaro RS/SS - 454

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.