MT Wtb 72 k10 wiring harness

[TCCGRIZ]

Looking for a decent complete ,uncut wiring harness for a 72 k10
Thanks Joe

[Harlowhead1972]

Hey Joe. In cab harness with fuse box? Auto or manual trans? Gauges or warning lights? I have a few nice ones, but they are specific to your options. Harlow

[TCCGRIZ]

Originally Posted by Harlowhead1972

Hey Joe. In cab harness with fuse box? Auto or manual trans? Gauges or warning lights? I have a few nice ones, but they are specific to your options. Harlow

Sorry should have specified . Auto and gauges . Light, engine ,in cab, intermediate long box and rear for fleetside .
I'm zip code 59701

[Harlowhead1972]

Hi Joe. Dang it! I have a perfect interior harness, but it's for manual with gauges. Harlow

[TCCGRIZ]

Thanks for checking Harlow

[TCCGRIZ]

Ttt

[randy500]

I have a decent 72 or so 7 hole gauge panel inside wiring harness, yellow wire to turn signal switch is cut. I think it was cut for delay wipers (towofakind's kit). Has an add on wire but not cut on a brown wire at the heater connection. I would take $100 for it and would probably in a medium or large flat rate box.

[TCCGRIZ]

Originally Posted by randy500

I have a decent 72 or so 7 hole gauge panel inside wiring harness, yellow wire to turn signal switch is cut. I think it was cut for delay wipers (towofakind's kit). Has an add on wire but not cut on a brown wire at the heater connection. I would take $100 for it and would probably in a medium or large flat rate box.

Would that be a hundred shipped ?

[randy500]

Plus shipping, med box is about $13 or so I think. I will get a couple pics of the harness. I might have the others your asking for too.

[randy500]

No burnt connectors

[randy500]

Cut yellow wire and added pigtail on brown at heater switch

[randy500]

Overall pic

[randy500]

Rear light harness with blue tape marking trailer wiring splices
Uncut front to rear along frame taillight harness in pic too

[randy500]

Nice chevy front light harness, one pigtail added to horn wire, marked with blue tape. Hasn’t been modified for internal regulated alternator like most have been....

[randy500]

I also have this engine harness, needs work but they are very simple.

[randy500]

Pricing:
Inside $100 as previously stated
Under truck front to back 4 wire ribbon $30
Taillight Harness $50
Front Light harness $100
Engine harness free with purchase
I will send it all to you for $275 shipped including paypal fees.

[randy500]

You might see in the picture that the front light harness is missing the terminal block that mounts to the fender by the battery, I have one that I need to find, I saw it a week ago and put it someplace, or I probably have one on my parts truck out back.

[randy500]

I also have this big block engine harness, one splice on coil wire shown in pic. Aftermarket ends on starter and coil wires.
Big block starter wires are longer because they follow the intake manifold to the front then go under the exhaust to the starter. Also has metal wire holder that mounts to back of drivers head for temp sensor, also shown in pic.

Add $50 to previous price if you want this harness.

[randy500]

Found terminal block for front lighting harness and installed it.

[TCCGRIZ]

I'll take the inside and tail light harness
PM me you info
Thanks

[randy500]

Originally Posted by TCCGRIZ

I'll take the inside and tail light harness
PM me you info
Thanks

PM sent.

[TCCGRIZ]

Payment sent via paypal

[randy500]

Originally Posted by TCCGRIZ

Payment sent via paypal

Thank you and your item is shipped. I will PM you the tracking number.