what are you using for the cold air intake - The 1947 - Present Chevrolet & GMC Truck Message Board Network

my kids toy · 09-15-2018, 05:03 AM

what did you use for the cold air intake ?

**mongocanfly** · 09-15-2018, 08:26 AM

I bought stuff from spectre and eBay and built my own....although it's not a true cold air...
I've seen some use the factory air box

BR3W CITY · 09-15-2018, 09:55 AM

I think the ol' Ebay generic kits do the trick for most folks, then get swapped around a bit. Depending on what stuff you have up front (battery, ECM, washer tank, overflow), you'll need to swap the tubes and couplers around, but usually you can get a simple intake that comes out where you want it. I think i just searched "04 silverado intake".

**Clyde65** · 09-15-2018, 12:08 PM

I used these guys.

https://www.intakehoses.com

my kids toy · 09-16-2018, 12:33 PM

Thanks for posting.
for those that can please post pics for others to get ideas.

DLW · 09-16-2018, 02:17 PM

I used the AirAid UBI master kit https://www.airaid.com/master_kits.aspx
I had to get a bit creative in that I had no way to make a direct 90* turn in any direction but up, just no room without hitting the fans, radiator hose or power steering res. This system was simple and pretty nice to use, maybe not the cheapest solution though, but was nice to have all the different angles and lengths to choose from.

**michael bustamante** · 09-24-2018, 03:21 PM

dang that looks good, im about ready for my intake as well and have no idea what to use

flipper58 · 09-25-2018, 03:08 PM

I'm in the same boat on a search for an air intake kit. Just saw this one:
https://www.sikky.com/product/univer...intake-system/

Looks pretty slick and it's priced ok given some of these kits. Anyone ever use one of these?

09-15-2018, 05:03 AM	#1
my kids toy Registered User Join Date: May 2018 Location: Grand Haven, mi Posts: 269	what are you using for the cold air intake what did you use for the cold air intake ?

09-15-2018, 08:26 AM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,671	Re: what are you using for the cold air intake I bought stuff from spectre and eBay and built my own....although it's not a true cold air... I've seen some use the factory air box __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

09-15-2018, 09:55 AM	#3
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: what are you using for the cold air intake I think the ol' Ebay generic kits do the trick for most folks, then get swapped around a bit. Depending on what stuff you have up front (battery, ECM, washer tank, overflow), you'll need to swap the tubes and couplers around, but usually you can get a simple intake that comes out where you want it. I think i just searched "04 silverado intake". __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

09-15-2018, 12:08 PM	#4
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: what are you using for the cold air intake I used these guys. https://www.intakehoses.com __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

09-16-2018, 12:33 PM	#5
my kids toy Registered User Join Date: May 2018 Location: Grand Haven, mi Posts: 269	Re: what are you using for the cold air intake Thanks for posting. for those that can please post pics for others to get ideas.

09-16-2018, 02:17 PM	#6
DLW Registered User Join Date: Apr 2014 Location: Union City, CA Posts: 384	Re: what are you using for the cold air intake I used the AirAid UBI master kit https://www.airaid.com/master_kits.aspx I had to get a bit creative in that I had no way to make a direct 90* turn in any direction but up, just no room without hitting the fans, radiator hose or power steering res. This system was simple and pretty nice to use, maybe not the cheapest solution though, but was nice to have all the different angles and lengths to choose from.

09-24-2018, 03:21 PM	#7
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: what are you using for the cold air intake dang that looks good, im about ready for my intake as well and have no idea what to use __________________ 1967custom

09-25-2018, 03:08 PM	#8
flipper58 Registered User Join Date: Sep 2013 Location: Pleasant Ridge, MI Posts: 285	Re: what are you using for the cold air intake I'm in the same boat on a search for an air intake kit. Just saw this one: https://www.sikky.com/product/univer...intake-system/ Looks pretty slick and it's priced ok given some of these kits. Anyone ever use one of these?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.