fuel gague - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tpjb57 · 11-17-2003, 01:24 PM

I have a 85 c10, fuel gauge is stuck on 1/4 tank, checked sending unit, removed it and lifted float, needle mooved, replaced sending unit because ground tab was missing, gauge still does not work. question, should the wire from the gauge to the sending unit light up my test light? I barely get a glow. I am trying to figure out if the gauge is bad. ground is great, wires are good. Help
Tom in Alabama

*gn4u2c* · 11-17-2003, 01:31 PM

if you move the flot all the way up does the gauge go to full? if so gauge is good if not gauge is bad as long as you have a good ground and all connections are tight.

11-17-2003, 01:24 PM	#1
tpjb57 Registered User Join Date: Oct 2003 Location: Mobile, Alabama Posts: 42	fuel gague I have a 85 c10, fuel gauge is stuck on 1/4 tank, checked sending unit, removed it and lifted float, needle mooved, replaced sending unit because ground tab was missing, gauge still does not work. question, should the wire from the gauge to the sending unit light up my test light? I barely get a glow. I am trying to figure out if the gauge is bad. ground is great, wires are good. Help Tom in Alabama

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-17-2003, 01:31 PM	#2
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	if you move the flot all the way up does the gauge go to full? if so gauge is good if not gauge is bad as long as you have a good ground and all connections are tight.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.