CA Single Wall Plug and Plate/wiring.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**amcgeh01** · 01-24-2019, 11:50 PM

Hello all,

I too am looking for at least the plate for starters.. if you have the plug and wiring then that would be even better... Thanks in advance...

- A.J.

**1rippen6** · 01-25-2019, 12:13 AM

I see you bought stickers a couple years ago, do you just need the plate. I have several plates but the letters are almost gone.

**amcgeh01** · 01-25-2019, 12:21 AM

Hey Rip, Thanks for responding.. Yes, a plate for starters and I will work down from there...

Quote:

Originally Posted by 1rippen6

I see you bought stickers a couple years ago, do you just need the plate. I have several plates but the letters are almost gone.

**amcgeh01** · 01-25-2019, 12:32 AM

Also, since I am sure you have pulled a few in your day... How are the wires routed..? If you have any pics that would be great... I figure I will have to use a snake and fish it from the rear light opening.. But not sure how it's routed from the plug to the firewall...

Quote:

Originally Posted by amcgeh01

Hey Rip, Thanks for responding.. Yes, a plate for starters and I will work down from there...

**1rippen6** · 01-25-2019, 01:17 AM

I have some pulled already I can get a picture of that. The light socket actually comes out of the base. As far as putting them back in I never have lol.

NJKelly · 01-25-2019, 08:53 PM

Quote:

Originally Posted by 1rippen6

I have some pulled already I can get a picture of that. The light socket actually comes out of the base. As far as putting them back in I never have lol.

Following

**1rippen6** · 01-25-2019, 10:57 PM

I went junkyarding today so I didn't make it out to the garage I'll get pictures tomorrow.

**1rippen6** · 01-26-2019, 12:01 PM

Here is what I have, I forgot pictures of the light base and socket. I will get them later today and post.

**1rippen6** · 01-27-2019, 07:15 PM

Here are some pictures

**amcgeh01** · 01-27-2019, 09:09 PM

Ok.. so how much for the plate with screws..?

Quote:

Originally Posted by 1rippen6

Here are some pictures

**1rippen6** · 01-28-2019, 03:06 PM

35 in a padded envelope.

**amcgeh01** · 01-30-2019, 12:18 AM

Sorry Rip, I am going to have to pass on the plate for now... Thanks for the offer though...

Quote:

Originally Posted by 1rippen6

35 in a padded envelope.

**1rippen6** · 01-30-2019, 12:39 AM

Quote:

Originally Posted by amcgeh01

Sorry Rip, I am going to have to pass on the plate for now... Thanks for the offer though...

No problem, thanks for letting me know.

01-24-2019, 11:50 PM	#1
amcgeh01 Senior Member Join Date: Jul 2009 Location: SoCal Posts: 206	Single Wall Plug and Plate/wiring.. Hello all, I too am looking for at least the plate for starters.. if you have the plug and wiring then that would be even better... Thanks in advance... - A.J. __________________ ******************************************** In-work on my 5.3L/4L65E/NP208 case conversion into a 1972 GMC JImmy 4x4... Not as simple as it looks folks..

01-25-2019, 12:13 AM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Single Wall Plug and Plate/wiring.. I see you bought stickers a couple years ago, do you just need the plate. I have several plates but the letters are almost gone.

01-25-2019, 01:17 AM	#5
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Single Wall Plug and Plate/wiring.. I have some pulled already I can get a picture of that. The light socket actually comes out of the base. As far as putting them back in I never have lol.

01-25-2019, 10:57 PM	#7
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Single Wall Plug and Plate/wiring.. I went junkyarding today so I didn't make it out to the garage I'll get pictures tomorrow.

01-26-2019, 12:01 PM	#8
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Single Wall Plug and Plate/wiring.. Here is what I have, I forgot pictures of the light base and socket. I will get them later today and post. Attached Images

01-27-2019, 07:15 PM	#9
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Single Wall Plug and Plate/wiring.. Here are some pictures Attached Images

01-28-2019, 03:06 PM	#11
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: Single Wall Plug and Plate/wiring.. 35 in a padded envelope.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.