NE 64-66 GMC Cab Big Window Part Out Power Brakes

[paulspickupparts]

Just had this come in . This has the big back window conversion piece . I would prefer to sell that piece locally as I just went thru the nightmare of shipping of a pair fenders . All other parts are priced plus shipping. Sorry for the double pricing but tired of the paypal fees. These parts will be going to Lincoln Nebraska swap meet the first part of March if not sold plus many other parts I have .

Rear Cab Big Window Coversion Piece . I will cut where you want it . No shipping on this item . $400
Power Brake Booster. I am selling this to be rebuilt. I will save all the mounting hardware I find upon removal . $200 Postal M.O. $250 Paypal
Dash Cut Out $100 Postal M.O or $125.00 Paypal
Complete Set of Custom Trim with Custom Emblems Few small dings in the door trim but good . Can get more photos $150 Postal M.O. $200.00 Paypal .

When weather warms up and before the swap meet the whole cab will get cut up .

[paulspickupparts]

pics

[vetnat]

Does it have windshield washers? If so, I'm looking for the knob, and possibly the whole wiper/washer motor. Thanks.

[paulspickupparts]

I do not think it had wipers with washers. If it does I will get back to you. Thanks

[blazin71K5]

What would shipping on the custom trim pieces be to 75042, thanks

[tchevs]

I only need the pillar pieces of the custom trim so I’ll get second in line

[1968vetL-71]

I'll hop in line on the complete set of door trim. Shipping to 69101 North Plate, ne. Thanks

Also interested in the dash pending condition? rust ? pics? thanks

[paulspickupparts]

Originally Posted by paulspickupparts

I do not think it had wipers with washers. If it does I will get back to you. Thanks

I have a very complete washer system from a 65 Chevy Pickup. It would have the Chevy knob but pretty complete motor with pump hardware haness bottle holder etc .

[paulspickupparts]

Originally Posted by blazin71K5

What would shipping on the custom trim pieces be to 75042, thanks

Hi shipping would be between $15 and $20 depending on how much they add for insurance . Shipping would be actual and could wait on payment until boxed for exact quote.

[paulspickupparts]

Originally Posted by tchevs

I only need the pillar pieces of the custom trim so I’ll get second in line

You are second it line . This is for the complete set , Not seperating . I occaisionally get parts but for not I only have complete sets . Thanks

[paulspickupparts]

Originally Posted by 1968vetL-71

I'll hop in line on the complete set of door trim. Shipping to 69101 North Plate, ne. Thanks

Also interested in the dash pending condition? rust ? pics? thanks

Third in line. Thanks

[vetnat]

Originally Posted by paulspickupparts

I have a very complete washer system from a 65 Chevy Pickup. It would have the Chevy knob but pretty complete motor with pump hardware haness bottle holder etc .

Thanks for looking. Honestly, I would only need the motor with pump, how much are you asking?

[paulspickupparts]

For the whole setup it would be $100 . I will have to check . I know I sold a complete setup a while back . Pretty sure I still have one. Thanks

[GMCNUT]

Damn Paul, no whole cab price? that cab sure looks worth saving vs cutting on....floors must be gone if you are only offering to cut it. I hate to see stuff like this cut up when there is so little left

[paulspickupparts]

Hey , good hearing from you. As far as selling the whole cab I would prefer to sell complete. And I did try that several years ago.Here is how it worked . Buyer requested shipping quote . Shipping came in high and had to be crated for insurance purpose . Endless quotes and hours on the phone getting quotes.Plus I have to drive 60 miles to a termainal . It takes about a 4 hours of a day to build a good crate and about a $100 in lumber . About three hours to drive to freight terminal and get it on its way . Shipping usually ran from $500-$1000 . Because of the high cost of shipping the buyer usually wanted about a $250 cab to offset the high cost of shipping. I tried to only deal with near rust free cabs and found out I could not sell a rust free cab for $250 . The moral of the story was I NEVER sold a cab . I did take a lot of photos , endless hours on the phone a a buyer that said "I wish you lived closer "

So ,I do this . Most of the parts can be easily shipped except for the conversions parts. If you wanna hear something better this was on a four wheel drive frame which I passed on . I did pick up some GMC power steering stuff from 60-66 and the GMC V-6 powerglide . Also a GMC auto column.

Good hearing from you . Been a while.

[shortstep60]

Is there very much rust in your cab? I have a friend that needs one he would have to change out the dash. He can drive up and there and pick it up . I see it has the trim around the windshield is it for sale I need some for a truck I am building.

[paulspickupparts]

One of the reasons I am parting is because there is some in the upper drip rail. I figured that would deter selling as a complete cab. I am sure the rockers will need to be replaced and or the cab mounts. I seem to have better luck parting them out than selling as complete cabs . Thanks

[shortstep60]

Is the windshield trim for sale?

[paulspickupparts]

I am going to use the windshield stainless on one of my trucks. Thanks

[blazin71K5]

Originally Posted by paulspickupparts

You are second it line . This is for the complete set , Not seperating . I occaisionally get parts but for not I only have complete sets . Thanks

I really only need the door window trim, would you allow me and the gentleman needing the pillar trim to split this up?

[tchevs]

I’m ok with splitting it up or buying all of it to get what I need if it gets to me.

[paulspickupparts]

Originally Posted by blazin71K5

I really only need the door window trim, would you allow me and the gentleman needing the pillar trim to split this up?

I would prefer one person would purchase the trim and split however they want. Reason being if one or the other buys part of it and the other backs out if turns into a mess . So for now you have first dibs on the whole setup. After you buy it you can split however you want. Thanks

[tchevs]

Paul that is understandable. Blazin, your call. I can buy the pillar stuff from you if you get it.

[blazin71K5]

Originally Posted by tchevs

Paul that is understandable. Blazin, your call. I can buy the pillar stuff from you if you get it.

Sounds good to me I will send a posta money order for the trim please pm me an address and I will work out the the sale of the other pieces, Matt

[paulspickupparts]

Originally Posted by blazin71K5

Sounds good to me I will send a posta money order for the trim please pm me an address and I will work out the the sale of the other pieces, Matt

Matt , the trim is yours . Thanks for working with me and the other buyer on the splitting of the parts. Sending thursday will be fine as we are about 10 degrees this morning.

I will try to save all the original fasteners that I can . Not sure if they are repod .. I will let you know the day I receive your money order and send tracking number . I will have it packaged and ready to go so should be same day shipping . Thanks again.

If you need to contact me directly here is my contact information and address for the M.O. Total will be 150.00 plus $20.00 shipping for a grand total of $170.00 to your door . Please include the address you would like to have it shipped to.

Pm sent with address , contact info etc.