CO SBC serpentine setup $125+shipping - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**clay68c10** · 06-11-2019, 08:30 PM

Selling a serpentine setup from a TBI era truck

Alternator charges fine, i ran it on my 93 for 2 weeks

PS pump fluid looks good

AC compressor is a core only

No water pump, but they’re cheap

I have the clutch fan also, not in the pic.

Also have the fasteners

$125 local

I can ship. Maybe cheaper without the compressor, it’s good as a core only.

**MeanGreen72C10** · 06-11-2019, 10:27 PM

can it be run w/o the ac pump?

**clay68c10** · 06-11-2019, 10:52 PM

Yes, there is an idler pulley available for running it without the compressor. The GM part number is 10118713

Lokin4AReason · 06-11-2019, 11:04 PM

What year is the setup ?

**clay68c10** · 06-12-2019, 06:24 AM

It came off an 89, but it is an exact match to what’s on my 93

**clay68c10** · 06-14-2019, 06:40 AM

Bump
By the way, this is the same setup GMPP sells and uses on their crate motors

**clay68c10** · 06-21-2019, 06:48 AM

Bump

**invicta455** · 06-23-2019, 08:24 PM

Could I get a price shipped to zip 27406

**clay68c10** · 06-24-2019, 06:25 AM

I will check on that today

**clay68c10** · 06-24-2019, 08:14 PM

Shipping with the compressor core is $45 (70lbs)
Without it is $39 (54lbs)

This is without the fan. It would need a separate box and would add another $20

This stuff is heavy.

**clay68c10** · 06-24-2019, 08:19 PM

If anyone wants, I can do just the 2 aluminum brackets, 1 steel bracket, fasteners, and pulleys/idlers/tensioner for $100 shipped.

Black71Shorty · 06-25-2019, 11:06 PM

Quote:

Originally Posted by clay68c10

If anyone wants, I can do just the 2 aluminum brackets, 1 steel bracket, fasteners, and pulleys/idlers/tensioner for $100 shipped.

I’ll take it like that. Send me your payment info.

Thanks
Coby

**clay68c10** · 06-26-2019, 07:00 AM

Ok. PM sent

Black71Shorty · 06-26-2019, 08:53 AM

Payment sent

Thanks

**clay68c10** · 06-26-2019, 09:09 AM

Sold!

06-11-2019, 08:30 PM	#1
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,991	SBC serpentine setup $125+shipping Selling a serpentine setup from a TBI era truck Alternator charges fine, i ran it on my 93 for 2 weeks PS pump fluid looks good AC compressor is a core only No water pump, but they’re cheap I have the clutch fan also, not in the pic. Also have the fasteners $125 local I can ship. Maybe cheaper without the compressor, it’s good as a core only. Attached Images __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 06-21-2019 at 06:48 AM.

06-11-2019, 10:27 PM	#2
MeanGreen72C10 Registered User Join Date: Feb 2019 Location: Harrison Township, MI Posts: 148	Re: SBC serpentine setup $125+shipping can it be run w/o the ac pump?

06-11-2019, 10:52 PM	#3
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,991	Re: SBC serpentine setup $125+shipping Yes, there is an idler pulley available for running it without the compressor. The GM part number is 10118713 __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-11-2019, 11:04 PM	#4
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 974	Re: SBC serpentine setup $125+shipping What year is the setup ? __________________ dont want to hear excuses, i want to hear solution(s)

06-12-2019, 06:24 AM	#5
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,991	Re: SBC serpentine setup $125+shipping It came off an 89, but it is an exact match to what’s on my 93 __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-14-2019, 06:40 AM	#6
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,991	Re: SBC serpentine setup $125+shipping Bump By the way, this is the same setup GMPP sells and uses on their crate motors __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-21-2019, 06:48 AM	#7
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,991	Re: SBC serpentine setup $125+shipping Bump __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-23-2019, 08:24 PM	#8
invicta455 Senior Member Join Date: May 2009 Location: greensboro north carolina Posts: 536	Re: SBC serpentine setup $125+shipping Could I get a price shipped to zip 27406

06-24-2019, 06:25 AM	#9
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,991	Re: SBC serpentine setup $125+shipping I will check on that today __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-24-2019, 08:14 PM	#10
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,991	Re: SBC serpentine setup $125+shipping Shipping with the compressor core is $45 (70lbs) Without it is $39 (54lbs) This is without the fan. It would need a separate box and would add another $20 This stuff is heavy. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-24-2019, 08:19 PM	#11
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,991	Re: SBC serpentine setup $125+shipping If anyone wants, I can do just the 2 aluminum brackets, 1 steel bracket, fasteners, and pulleys/idlers/tensioner for $100 shipped. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-26-2019, 07:00 AM	#13
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,991	Re: SBC serpentine setup $125+shipping Ok. PM sent __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

06-26-2019, 08:53 AM	#14
Black71Shorty Registered User Join Date: May 2009 Location: Ft. Worth, Texas...”Where the West begins” Posts: 424	Re: SBC serpentine setup $125+shipping Payment sent Thanks

06-26-2019, 09:09 AM	#15
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,991	Re: SBC serpentine setup $125+shipping Sold! __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.