Quality Seat Belts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CJ2A · 09-07-2019, 10:23 AM

I am finishing up a 1963 GMC build for my daughter. I want to learn from some of you’re experiences. The wife is wanting seat belts with a shoulder strap installed.

Can I get some pros & cons on the aftermarket seatbelts available ? I am more into Quality than price. Is the mounting of the shoulder strap solid even though it is just a drilled hole in the cab ?

**The Rocknrod** · 09-07-2019, 02:39 PM

In the FAQ section there are posts about seat belts:
http://67-72chevytrucks.com/vboard/s...d.php?t=646002

Aftermarket Seatbelts???
a long thread about seat belt options

Seat belts for stock bench seat, purchase and install info
a thread with information about a aftermarket seat belt kit for a bench seat, with photos.

1965 Seat Belts??? : July 2010 /60+ posts

anybody make the seat shoulder bolts : November 2013

1966 shoulder strap cab holes : April 2011

Seat belts???? : August 2014 /+15 posts, some photos and scanned diagrams

(what is) the best 2 point retractable seat belt? : September 2014

66' 3 Point Seatbelts_B Pillar Plug... March 2014

vin63 · 09-07-2019, 11:32 PM

The aftermarket 3-point seat belt conversion kits are a good idea. Be sure to use all of the backing hardware (the hardware that mounts to the rear of the panels) during the installation - the back side of the floor mounts and the B-pillar shoulder harness mount.

roll_the_dice · 09-08-2019, 10:11 AM

I am about to order 2 shoulder belts and a middle lap belt for my 65 from www.seatbeltsplus.com. They are $225 and about $70 cheaper than other sites I have looked at.

**The Rocknrod** · 09-08-2019, 04:24 PM

Quote:

Originally Posted by roll_the_dice

I am about to order 2 shoulder belts and a middle lap belt for my 65 from www.seatbeltsplus.com. They are $225 and about $70 cheaper than other sites I have looked at.

What buckle length are you getting and do you have a bench seat?

roll_the_dice · 09-08-2019, 05:01 PM

Quote:

Originally Posted by The Rocknrod

What buckle length are you getting and do you have a bench seat?

I do have a bench seat. 20" no sleeve buckle. I am afraid the 12" sleeved buckle wouldn't be long enough.

**The Rocknrod** · 09-08-2019, 05:58 PM

Keep us posted, I'd like to know on the length. On they're catalog on page 5 they show cable type buckle in 6", 12" 18" and 22".

**slepysal** · 09-10-2019, 12:15 AM

I am running some surplus Military Hummer 3 point belts that were purchased of E Bay about 4 years ago

vince1 · 09-10-2019, 09:12 AM

I think a collapsible steering shaft should be considered before the seat belt mod. In my other old car I won't put on the lap belt because the steering shaft has not yet been modified and in a front end collision, behind the wheel is not the place to be. I had an acquaintance who is not here today as a result of it.

An alternative to the 3 point harness is to change to a newer seat that has the belts built in.

roll_the_dice · 09-10-2019, 09:31 AM

Quote:

Originally Posted by slepysal

I am running some surplus Military Hummer 3 point belts that were purchased of E Bay about 4 years ago

Any pictures or other info on who you bought them from on ebay? I looked and mostly saw belts made in China... do you remember the length of your belt and buckle? Thanks

Gargoyle · 09-10-2019, 03:19 PM

Have you looked into Juliano's?

https://www.julianos.com/Seat-Belts-s/96.htm

forestb · 09-10-2019, 04:32 PM

Quote:

Originally Posted by Gargoyle

Have you looked into Juliano's?

https://www.julianos.com/Seat-Belts-s/96.htm

That's where I got mine and am vary happy with them. Thankfully they have never been tested.

vin63 · 09-10-2019, 04:58 PM

Quote:

Originally Posted by roll_the_dice

Any pictures or other info on who you bought them from on ebay? I looked and mostly saw belts made in China...

Unfortunately, almost all of the webbing material comes out of China, which is why some of the long-time racing safety equipment makers like Simpson no longer re-certify their belts and offer discounts on new replacements. I do some custom stuff for a few customers on OE type belt replacements through DJ Safety/Deist Safety, where they still have a large stock of webbing that was made in the US for some of these period-correct restoration orders.

This is one I did for a 69 Pontiac Firebird.

50-year old originals left; new webbing right:

**G8rN@te61** · 09-15-2019, 07:38 PM

I used seatbelts plus and they turned out great

**slepysal** · 09-17-2019, 10:41 PM

Quote:

Originally Posted by roll_the_dice

Any pictures or other info on who you bought them from on ebay? I looked and mostly saw belts made in China... do you remember the length of your belt and buckle? Thanks

I can't remember the seller I can take a picture if you like

roll_the_dice · 09-18-2019, 06:34 PM

Quote:

Originally Posted by slepysal

I can't remember the seller I can take a picture if you like

That would be great. Thanks, I appreciate it.

**slepysal** · 09-18-2019, 09:05 PM

here you go let me know if you need anymore
They fit my beer belly fine!
Name: IMG_1541.jpg
Views: 1014
Size: 34.2 KB

Name: IMG_1542.jpg
Views: 1026
Size: 49.3 KB

roll_the_dice · 09-19-2019, 09:08 AM

Quote:

Originally Posted by slepysal

here you go let me know if you need anymore
They fit my beer belly fine!

Thanks Sal...nothing wrong with a beer belly! happens to the best of us. haha

Vincenthdfan · 09-24-2019, 11:31 PM

Quote:

Originally Posted by slepysal

here you go let me know if you need anymore
They fit my beer belly fine!
Attachment 1940043

Attachment 1940044

Any chance I can see your mount points and how well the receiver end reaches up through the seat?

I found them for sale on eBay and just may pull the trigger on some if they appear to be a good fit.

I need to install some in my 62 SWB C10.

Thanks

**slepysal** · 09-25-2019, 10:45 PM

Quote:

Originally Posted by Vincenthdfan

Any chance I can see your mount points and how well the receiver end reaches up through the seat?

I found them for sale on eBay and just may pull the trigger on some if they appear to be a good fit.

I need to install some in my 62 SWB C10.

Thanks

I cam take some pics tomorow

**slepysal** · 09-27-2019, 08:31 PM

Here you go. The retractable part is bolted between the seat and floor and the receiver part is bolted to the seat. The seats are off of a Land Rover and came with the receiver attached. Hope this helps
Name: IMG_1547.jpg
Views: 829
Size: 48.6 KB

Name: IMG_1547.jpg
Views: 829
Size: 48.6 KB

Name: IMG_1545.jpg
Views: 850
Size: 42.1 KB

Vincenthdfan · 09-29-2019, 03:47 PM

Yes, that helps....thanks slepysal!

Afirehawk1 · 10-01-2019, 07:24 AM

Quote:

Originally Posted by The Rocknrod

In the FAQ section there are posts about seat belts:
http://67-72chevytrucks.com/vboard/s...d.php?t=646002

Aftermarket Seatbelts???
a long thread about seat belt options

Seat belts for stock bench seat, purchase and install info
a thread with information about a aftermarket seat belt kit for a bench seat, with photos.

1965 Seat Belts??? : July 2010 /60+ posts

anybody make the seat shoulder bolts : November 2013

1966 shoulder strap cab holes : April 2011

Seat belts???? : August 2014 /+15 posts, some photos and scanned diagrams

(what is) the best 2 point retractable seat belt? : September 2014

66' 3 Point Seatbelts_B Pillar Plug... March 2014

How is everyone installing the seatbelts if the pillar plug or nut brace is missing?
I must have an early 66.
I see the measurements but was curious best way to install.

roll_the_dice · 10-01-2019, 09:21 AM

Quote:

Originally Posted by Afirehawk1

How is everyone installing the seatbelts if the pillar plug or nut brace is missing?
I must have an early 66.
I see the measurements but was curious best way to install.

Here are the specific links to seat belts in the FAQ...scroll down a little.

http://67-72chevytrucks.com/vboard/s...55&postcount=4

Also, you would need a hardware kit from wherever you buy your seat belts. Something like this...

https://www.seatbeltsplus.com/PROD.h...ode=FHD-1046-1

Lastly, the best install thread I found was from LugNutz on this board. His website on the install is here...

Afirehawk1 · 10-01-2019, 01:14 PM

Quote:

Originally Posted by roll_the_dice

Here are the specific links to seat belts in the FAQ...scroll down a little.

http://67-72chevytrucks.com/vboard/s...55&postcount=4

Also, you would need a hardware kit from wherever you buy your seat belts. Something like this...

https://www.seatbeltsplus.com/PROD.h...ode=FHD-1046-1

Lastly, the best install thread I found was from LugNutz on this board. His website on the install is here...

Perfect
Thanks

09-07-2019, 10:23 AM	#1
CJ2A Registered User Join Date: May 2019 Location: Hathaway Pines, CA Posts: 121	Quality Seat Belts I am finishing up a 1963 GMC build for my daughter. I want to learn from some of you’re experiences. The wife is wanting seat belts with a shoulder strap installed. Can I get some pros & cons on the aftermarket seatbelts available ? I am more into Quality than price. Is the mounting of the shoulder strap solid even though it is just a drilled hole in the cab ?

09-07-2019, 02:39 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Quality Seat Belts In the FAQ section there are posts about seat belts: http://67-72chevytrucks.com/vboard/s...d.php?t=646002 Aftermarket Seatbelts??? a long thread about seat belt options Seat belts for stock bench seat, purchase and install info a thread with information about a aftermarket seat belt kit for a bench seat, with photos. 1965 Seat Belts??? : July 2010 /60+ posts anybody make the seat shoulder bolts : November 2013 1966 shoulder strap cab holes : April 2011 Seat belts???? : August 2014 /+15 posts, some photos and scanned diagrams (what is) the best 2 point retractable seat belt? : September 2014 66' 3 Point Seatbelts_B Pillar Plug... March 2014 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

09-07-2019, 11:32 PM	#3
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Quality Seat Belts The aftermarket 3-point seat belt conversion kits are a good idea. Be sure to use all of the backing hardware (the hardware that mounts to the rear of the panels) during the installation - the back side of the floor mounts and the B-pillar shoulder harness mount. __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

09-08-2019, 10:11 AM	#4
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: Quality Seat Belts I am about to order 2 shoulder belts and a middle lap belt for my 65 from www.seatbeltsplus.com. They are $225 and about $70 cheaper than other sites I have looked at. __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

09-08-2019, 05:58 PM	#7
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Quality Seat Belts Keep us posted, I'd like to know on the length. On they're catalog on page 5 they show cable type buckle in 6", 12" 18" and 22". __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 09-10-2019 at 07:42 AM.

09-10-2019, 12:15 AM	#8
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Quality Seat Belts I am running some surplus Military Hummer 3 point belts that were purchased of E Bay about 4 years ago __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-10-2019, 09:12 AM	#9
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,170	Re: Quality Seat Belts I think a collapsible steering shaft should be considered before the seat belt mod. In my other old car I won't put on the lap belt because the steering shaft has not yet been modified and in a front end collision, behind the wheel is not the place to be. I had an acquaintance who is not here today as a result of it. An alternative to the 3 point harness is to change to a newer seat that has the belts built in.

09-10-2019, 03:19 PM	#11
Gargoyle Registered User Join Date: Nov 2013 Location: Blacksburg, VA Posts: 289	Re: Quality Seat Belts Have you looked into Juliano's? https://www.julianos.com/Seat-Belts-s/96.htm

09-15-2019, 07:38 PM	#14
G8rN@te61 Senior Member Join Date: Oct 2017 Location: Fort Mill, SC Posts: 203	Re: Quality Seat Belts I used seatbelts plus and they turned out great

09-18-2019, 09:05 PM	#17
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Quality Seat Belts here you go let me know if you need anymore They fit my beer belly fine! __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-27-2019, 08:31 PM	#21
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Quality Seat Belts Here you go. The retractable part is bolted between the seat and floor and the receiver part is bolted to the seat. The seats are off of a Land Rover and came with the receiver attached. Hope this helps __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-29-2019, 03:47 PM	#22
Vincenthdfan Registered User Join Date: Sep 2014 Location: Olympia, Washington Posts: 172	Re: Quality Seat Belts Yes, that helps....thanks slepysal!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.