FL 1972 Blazer CST glove box, frame, tag and title - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Oldfashioned · 10-07-2019, 09:21 PM

Parting out a 1972 Blazer CST
Frame, tag, title and glove box $1500
Let me know if there are anything you need off this.

**71blksuper4x4** · 10-07-2019, 09:41 PM

Are you keeping the buckets?

**71blksuper4x4** · 10-07-2019, 09:42 PM

Does it have the speaker below the dash by ac controls?

**too much stuff** · 10-07-2019, 09:45 PM

Steering column and top hold down strips? Any woodgrain lower trim off the bedsides?

Oldfashioned · 10-07-2019, 10:47 PM

Quote:

Originally Posted by 71blksuper4x4

Are you keeping the buckets?

Sorry buckets are gone, have rear seats though.

Oldfashioned · 10-07-2019, 10:48 PM

Quote:

Originally Posted by 71blksuper4x4

Does it have the speaker below the dash by ac controls?

I’ll check but I don’t think so

Oldfashioned · 10-07-2019, 10:49 PM

Quote:

Originally Posted by too much stuff

Steering column and top hold down strips? Any woodgrain lower trim off the bedsides?

Only have a standard column not tilt
Most trim wasn’t useable. Lower is gone. Sorry

**too much stuff** · 10-08-2019, 07:51 AM

Any of the strips or brackets and hardware that hold the top on?

Harold Holbrook · 10-08-2019, 10:18 AM

Do you have the brackets that hold on the back interior panels . The long L shaped brackets that mount to the floor and by the rear door.

Thanks
Jr.

blap · 10-13-2019, 09:18 AM

Need the cig lighter and the radio knobs

**7D2N** · 10-13-2019, 07:59 PM

I would be interested in the door glass.
thanks

Toro · 10-16-2019, 02:55 PM

A/C Condenser?

blap · 10-22-2019, 06:16 PM

deluxe radio knobs?

**Gary 70 Jimmy** · 10-22-2019, 08:20 PM

I could use the frame and axles but you are to fare away

**MikeCofield** · 10-22-2019, 11:04 PM

Interested in chrome strips at the top of rear interior panels

jaybatta · 10-23-2019, 09:12 PM

Interested in 4wd oil dipstick and tube

Thanks

Joe

70jimmy · 10-27-2019, 01:39 AM

Upper radiator pipe?

skrenly · 10-27-2019, 07:35 AM

1) Passenger side kick panel air vent.
2) 2x bolts/washers for the backup light housing.
3) TRANS dip stick.

I can stop by next weekend if that's good for you.

Thanks Steve (Homestead, FL)

10-07-2019, 09:21 PM	#1
Oldfashioned Registered User Join Date: Nov 2018 Location: Fort Myers FL Posts: 82	1972 Blazer CST glove box, frame, tag and title Parting out a 1972 Blazer CST Frame, tag, title and glove box $1500 Let me know if there are anything you need off this. Attached Images

10-07-2019, 09:41 PM	#2
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: 1972 Blazer CST glove box, frame, tag and title Are you keeping the buckets? __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

10-07-2019, 09:42 PM	#3
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: 1972 Blazer CST glove box, frame, tag and title Does it have the speaker below the dash by ac controls? __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

10-07-2019, 09:45 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,788	Re: 1972 Blazer CST glove box, frame, tag and title Steering column and top hold down strips? Any woodgrain lower trim off the bedsides? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-08-2019, 07:51 AM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,788	Re: 1972 Blazer CST glove box, frame, tag and title Any of the strips or brackets and hardware that hold the top on? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-08-2019, 10:18 AM	#9
Harold Holbrook Registered User Join Date: Dec 2017 Location: Garden City , NY Posts: 492	Re: 1972 Blazer CST glove box, frame, tag and title Do you have the brackets that hold on the back interior panels . The long L shaped brackets that mount to the floor and by the rear door. Thanks Jr.

10-13-2019, 09:18 AM	#10
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: 1972 Blazer CST glove box, frame, tag and title Need the cig lighter and the radio knobs

10-13-2019, 07:59 PM	#11
7D2N Senior Member Join Date: Aug 2007 Location: Morgan County Utah Posts: 718	Re: 1972 Blazer CST glove box, frame, tag and title I would be interested in the door glass. thanks __________________ Just for the fun of it

10-16-2019, 02:55 PM	#12
Toro Registered User Join Date: Nov 2018 Location: Huntsville, AL Posts: 339	Re: 1972 Blazer CST glove box, frame, tag and title A/C Condenser?

10-22-2019, 06:16 PM	#13
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: 1972 Blazer CST glove box, frame, tag and title deluxe radio knobs?

10-22-2019, 08:20 PM	#14
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: 1972 Blazer CST glove box, frame, tag and title I could use the frame and axles but you are to fare away __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

10-22-2019, 11:04 PM	#15
MikeCofield Senior Member Join Date: Dec 2010 Location: Eastaboga AL Posts: 4,937	Re: 1972 Blazer CST glove box, frame, tag and title Interested in chrome strips at the top of rear interior panels

10-23-2019, 09:12 PM	#16
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 838	Re: 1972 Blazer CST glove box, frame, tag and title Interested in 4wd oil dipstick and tube Thanks Joe __________________ Joe 1968 K20 1970 K20 Semper Fi

10-27-2019, 01:39 AM	#17
70jimmy Registered User Join Date: May 2000 Location: Darlington SC Posts: 115	Re: 1972 Blazer CST glove box, frame, tag and title Upper radiator pipe? __________________ 1972 CST Blazer 350/350/205 tilt, ac, white with blue highlander plaid interior 1972 CST Jimmy 350/4speed/205 med red with black interior 1972 K20 Custom Deluxe 350/4speed/205 white/ochre/white/ochre 1972 CST Blazer 350/350/205 tach, ac, warn 5687 winch, light yellow with saddle interior 1972 CST Jimmy 350/4speed/205 dark olive with olive interior

10-27-2019, 07:35 AM	#18
skrenly Registered User Join Date: Feb 2008 Location: Coronado, CA Posts: 1,085	Re: 1972 Blazer CST glove box, frame, tag and title 1) Passenger side kick panel air vent. 2) 2x bolts/washers for the backup light housing. 3) TRANS dip stick. I can stop by next weekend if that's good for you. Thanks Steve (Homestead, FL)



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.