Show me your LINEX bed liners. Need some close ups

[BabyBlue]

I recently had a LineX liner done after just getting a nice paint job on my truck and they jacked this thing up. I'm currently waiting resolution from the store owner on what we are going to agree on them doing aside from reshooting the liner, but I wanted to see some shots of how everyone else's was done. ESPECIALLY the tailgate jamb area. Please share some pictures with me.

[SunSoaked]

A picture is worth a thousand words. Let's see what they did.

[BabyBlue]

My issues

[BabyBlue]

More

[SunSoaked]

I'll look at mine when I get home in a few hours. The texture doesn't look bad. Is it just shadows I see where it looks light/dark or is it actually a distinct line?
The top and bottom of the tailgate look terrible. My lining goes over the edge and it looks much cleaner. The bottom of your gate looks like they sprayed it while closed and then opened it. I'd complain too.

[mongocanfly]

Wow that looks bad..I'd be pisse to

[SCOTI]

Originally Posted by BabyBlue

My issues

The pics can be interpreted different by different eyes. What is/are your specific complaints?

I have Line-X on my dually. Where they did your tape line points seem similar to mine. The seam sealing def could have been done better on yours IMO (mine was ok).

[BabyBlue]

-they grinded paint off my tailgate where there isn’t any liner (seen at the top of the gate)
-they didn’t use fine line tape so the lines are not straight....they used razors, or a steak knife, maybe even a machete from the looks of it.
-after three days there are soft spots in the liner
-line texture is nowhere near consistent
-was told they are suppose to radius the liner in the jamb area so I wanted to see if anyone had something lime that

[SCOTI]

Originally Posted by BabyBlue

-they grinder paint off my tailgate (seen at the top of the gate)
-they didn’t use fine line tape so the lines are not straight....they used razors, or a steak knife, maybe even a machete from the looks of it.
-after three days there are soft spots in the liner
-line texture is nowhere near consistent
-was told they are suppose to radius the liner in the jamb area so I wanted to see if anyone had something lime that

Seems mine was done like yours but I'll look @ my jambs as I don't recall 100%.
They used fine line tape on my gate & front bed panel but my front panel was not painted so it didn't matter there.

The issues I had? Almost immediately there was 'white' or clouding in some areas. At first I thought it was possibly sanding dust from under the bed rail lip but it's not. Just seems in certain spots the liner color is not mixed well & the more it dried the more obvious it was. Appearance wise, it 'looks' like a dirty spot (like dried dust after a dirty rain). The 2nd issue is where the bed bolts go through the floor, the liner has released from there on my floor. On half of the bolts, there are pillow-like pockets surrounding the carriage bolt head.

[BabyBlue]

Bump. Anyone have pics of what their liners look like in the tailgate jamb area?

[SunSoaked]

Sorry for the delay. Here's mine. As I said, they went over the bedrails on mine. You can't see the top because I have a shell on it but you can see the edge on the outside. My tailgate jams were not sprayed but with the gate closed it's completely covered in the inside of the bed.

[SunSoaked]

One more

[SCOTI]

I meant to get some pics of mine but my other project took longer than expected. Sorry.

[BabyBlue]

Thanks Sunsoaked. And Scoti, no big deal. I find it hard to believe that very few people have pics of their liners on here.

[SCOTI]

Originally Posted by BabyBlue

Thanks Sunsoaked. And Scoti, no big deal. I find it hard to believe that very few people have pics of their liners on here.

Never has been a big deal to me. I'm betting others have a similar mindset.