Front x-member for 68 gmc 3/4 ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68jimmy · 12-04-2003, 10:35 PM

I have a 3/4 ton gmc and i'm looking to convert it to a 1/2 ton setup to allow me to lower it a bit. While checking around town I have one place with a x-member from a 70 or better 1/2 ton with the p/s gearbox & pump and the power disc booster for around $450... Since i'm relativley new to trucks and wanting to do some customizing, does this price sound ok??

The only problem to this setup is finding the power steering pump/resevoir bracket for the v-6 engine. Is there a part number or some cross reference that will work? In addition how about the pulley from the crank to drive the p/s pump...

thanks in advance!!

phantom dually · 12-04-2003, 11:18 PM

I would try to ind a truck in the local paper that is being parted out. Chances are you can get a whole truck for that price if it is wrecked or get the member for next to nothing because it is not everyday someone is looking for it.

*1FaastC10* · 12-05-2003, 12:19 AM

man, and to think i sold mine complete for $80!!!

68jimmy · 12-05-2003, 12:27 AM

I guess I'll just wait it out a bit and see if anything comes up in the local rag...

By the way is there someplace or someone who has done this type of swap who has a "shopping list" already done?

Thanks!

12-04-2003, 10:35 PM	#1
68jimmy Registered User Join Date: Dec 2003 Location: albuquerque Posts: 431	Front x-member for 68 gmc 3/4 ton I have a 3/4 ton gmc and i'm looking to convert it to a 1/2 ton setup to allow me to lower it a bit. While checking around town I have one place with a x-member from a 70 or better 1/2 ton with the p/s gearbox & pump and the power disc booster for around $450... Since i'm relativley new to trucks and wanting to do some customizing, does this price sound ok?? The only problem to this setup is finding the power steering pump/resevoir bracket for the v-6 engine. Is there a part number or some cross reference that will work? In addition how about the pulley from the crank to drive the p/s pump... thanks in advance!!

12-04-2003, 11:18 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I would try to ind a truck in the local paper that is being parted out. Chances are you can get a whole truck for that price if it is wrecked or get the member for next to nothing because it is not everyday someone is looking for it. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-05-2003, 12:19 AM	#3
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	man, and to think i sold mine complete for $80!!!

12-05-2003, 12:27 AM	#4
68jimmy Registered User Join Date: Dec 2003 Location: albuquerque Posts: 431	I guess I'll just wait it out a bit and see if anything comes up in the local rag... By the way is there someplace or someone who has done this type of swap who has a "shopping list" already done? Thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.