|
12-29-2019, 01:16 PM
|
#1 |
|
Registered User
Join Date: Apr 2017
Location: Hythe alberta
Posts: 15
|
Squaring up cab
Looking for suggestions for squaring up the cab prior to assembly
Posted via Mobile Device |
|
|
|
12-29-2019, 02:26 PM
|
#2 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Squaring up cab
On the frame? Or the sheet metal itself?
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
12-29-2019, 03:19 PM
|
#3 | |
|
Registered User
Join Date: Apr 2017
Location: Hythe alberta
Posts: 15
|
Quote:
Posted via Mobile Device |
|
|
|
|
|
12-29-2019, 03:26 PM
|
#4 | |
|
Registered User
Join Date: Apr 2017
Location: Hythe alberta
Posts: 15
|
Quote:
Posted via Mobile Device |
|
|
|
|
|
12-30-2019, 10:29 PM
|
#5 |
|
Registered User
Join Date: Mar 2014
Location: Salinas Ca.
Posts: 625
|
Re: Squaring up cab
Since the doors are adjustable they can be hung and the cab can still be tweaked.
If the frame is spot on you could level and confirm the chassis is square, then mount the body rigid to the frame without the rubber isolators and confirm the bolts are centered in the bores of the cab and the frame. (will need to build some sleeves. Simple job if you have access to a lathe) Once frame is bolted and aligned with the chassis you could then hang and gap the doors. once they are perfect weld in the firewall. and you should be golden.
__________________
Our 1965 GMC big block pro mod build http://67-72chevytrucks.com/vboard/s...d.php?t=746098 |
|
|
|
|
12-31-2019, 12:24 PM
|
#6 | |
|
Registered User
Join Date: Apr 2017
Location: Hythe alberta
Posts: 15
|
Quote:
Posted via Mobile Device |
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
