NSS Connector Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pontitruck · 01-12-2020, 10:11 PM

Hi Guys

I am in the process of using the factory 2 connector NSS on the 4l60e in the 65. I have researched these pages and found some good information but wanted to ask some questions. So I have I bought the harness for the NSS and the colors don't match the schematic that I pulled from my research hear. Can someone take a look at my pics and tell me if the 4 corner wires are still right based on the two pics or I need to use something else and the colors don't matter?

Thanks

ls1nova71 · 01-13-2020, 12:33 PM

What exactly are you looking to do? The wire colors are correct on the first picture you posted as they were, not the way you have them written in. That could be maybe because you are using an aftermarket pigtail that has generic colors, not sure. The second pic you posted, I drew, and it is for the single plug NSS. If you are wanting to just use the NSS you have for back up lights, you need wires in pins C and F. For the starter relay, you would use pins G and E.

Pontitruck · 01-13-2020, 12:44 PM

Quote:

Originally Posted by ls1nova71

What exactly are you looking to do? The wire colors are correct on the first picture you posted as they were, not the way you have them written in. That could be maybe because you are using an aftermarket pigtail that has generic colors, not sure. The second pic you posted, I drew, and it is for the single plug NSS. If you are wanting to just use the NSS you have for back up lights, you need wires in pins C and F. For the starter relay, you would use pins G and E.

Thanks for the reply. I am using an aftermarket pigtail with the colors written down in the picture. I want to use it for BU lights and starter as you have said. I knew the second one was your drawing but thought it was the two connector style switch at the trans. Below is a pick of my harness

**truckdude239** · 01-23-2020, 11:07 PM

Can u post a link or part number for that plug i need to find one like that

Pontitruck · 01-24-2020, 09:31 AM

Quote:

Originally Posted by Pontitruck

Thanks for the reply. I am using an aftermarket pigtail with the colors written down in the picture. I want to use it for BU lights and starter as you have said. I knew the second one was your drawing but thought it was the two connector style switch at the trans. Below is a pick of my harness

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192487886971
Posted via Mobile Device

**truckdude239** · 01-24-2020, 09:33 AM

Thanks man i ordered one i am using a van tilt column and can use my factory nss

01-12-2020, 10:11 PM	#1
Pontitruck Registered User Join Date: Sep 2018 Location: South of the Indy 500 Posts: 116	NSS Connector Question Hi Guys I am in the process of using the factory 2 connector NSS on the 4l60e in the 65. I have researched these pages and found some good information but wanted to ask some questions. So I have I bought the harness for the NSS and the colors don't match the schematic that I pulled from my research hear. Can someone take a look at my pics and tell me if the 4 corner wires are still right based on the two pics or I need to use something else and the colors don't matter? Thanks Attached Images

01-13-2020, 12:33 PM	#2
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: NSS Connector Question What exactly are you looking to do? The wire colors are correct on the first picture you posted as they were, not the way you have them written in. That could be maybe because you are using an aftermarket pigtail that has generic colors, not sure. The second pic you posted, I drew, and it is for the single plug NSS. If you are wanting to just use the NSS you have for back up lights, you need wires in pins C and F. For the starter relay, you would use pins G and E. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-23-2020, 11:07 PM	#4
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: NSS Connector Question Can u post a link or part number for that plug i need to find one like that __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

01-24-2020, 09:33 AM	#6
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: NSS Connector Question Thanks man i ordered one i am using a van tilt column and can use my factory nss __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.