8-lug D44 rotor and hub - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nate_g_2003 · 01-13-2020, 11:38 AM

Looking to do new wheel bearings and spindle bearings on my 72 3/4t Burb with a D44. Already have bearings, but need new spindles and decided to do rotors while I'm at it. I'm having trouble finding the rotor/hub put together, or failing that, new hubs to put on rotors that are readily available/easy to find.

It's an 8-lug, open knuckle, big bearing, with the old Spicer blue knob hubs. I can find pics online of hub/rotor combos, but they never seem to be in stock. Any ideas of better search terms to find the hubs themselves?

01-13-2020, 11:38 AM	#1
nate_g_2003 Registered User Join Date: Jun 2011 Location: Gregory, TX Posts: 413	8-lug D44 rotor and hub Looking to do new wheel bearings and spindle bearings on my 72 3/4t Burb with a D44. Already have bearings, but need new spindles and decided to do rotors while I'm at it. I'm having trouble finding the rotor/hub put together, or failing that, new hubs to put on rotors that are readily available/easy to find. It's an 8-lug, open knuckle, big bearing, with the old Spicer blue knob hubs. I can find pics online of hub/rotor combos, but they never seem to be in stock. Any ideas of better search terms to find the hubs themselves? __________________ -Nathan- 1972 GMC K2500 Suburban "The Project" 2013 GMC Sierra 1500 SLT Z71 "The Daily Driver" 2005 Ford F150 Lariat SCrew 2WD "The Daily Driver" SOLD 1995 GMC Sierra C1500 SLE "The Daily Driver"SOLD 2003 Ford Ranger Edge 2DSC 2WD Flareside "The Daily Driver/Project"SOLD

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.